Prequalifications are invited for Renovation/Rehabilitation of College of Engineering Lecture Theatres - Comprising Interior/Exterior: Demolition and Alteration Works, Roof: Replacement of Damaged Roof Covering and Affected Members. Walls: Repair/Replaster of Damaged Wall Renderings, Ceiling: Replacement of Damaged Ceiling Boards including Noggings and Battens, Floor: Replacement of Damaged Floor Finishes, Electrical Works, Mechanical Works, Air Conditioning: Fix All Faulty Air Conditioners, including External Works, Painting: Scrap off Old Paint Defects, Prepare to Receive New Paint Finish etc. Furnishing: Supply of 1nr High Quality Meeting Table (2000 X 1000 X 760mm High) with Other Accessories, 1nr Double 15 Rechargeable Public Address System with Attached Speakers and Microphone for Conference Hall, 8nr Classroom Chairs and Table. College of Environmental Design & Tech (Building Tech, Urban) Comprising Demolition and Alteration Works, Roof Replacement of Damaged Roof Coverings and Affected Members, Walls: Repair/Replaster of Damaged Wall Renderings, Ceiling: Replacement of Damaged Ceiling Boards, including Noggings and Battens. Floor: Replacement of Damaged Floor Finishes, Electrical Works, Plumbing Works, Air Conditioning: Fix All Faulty Air Conditioners, including External Works, Painting: Scrap off Old Paint Defects, Prepare to Receive New Paint Finish etc. Furnishing: Supply and Install 160nr a3- Size Drawing Board with Moveable Iron Stand, 160nr Purpose Made Quality and Round Shape Stools and 14nr Ict Carrels Consisting of Table and Chairs with Provision of Electricity Connection to Computers. Regional Planning: Demolition Works, Roof and Roof Covering Works (62sqm), Repair 11nr Window Size (1200 × 1200mm), Install 2nr New Aluminium Window Size 3500 X 1200mm High, Doors: Supply and Fix 3nr/2nr Flush Doors (1200/900 X 1200mm), Wall Finish Works, Electrical Works, Floor Finish Works, Ceiling Finish Works, Mechanical Works Furnishing: Supply and Install 20nr A3-Size Drawing Board with Moveable Iron Stand, Construct 35nr Stopper on Existing Drawing Boards, 35nr Purpose Made Quality and Round Shape Stools, Supply of 1nr High Quality Meeting Table (2000 X 1000 X 760mm High) with Other Accessories and 50nr Ict Carrels Consisting of Table and Chairs with Provision of Electricity Connection to Computers. Architectural Studios: Windows and Doors: Replace Existing Damaged 2nr Windows, Supply and Install 21nr Window Blinds, Doors: Supply and Install 2nr Purpose Made Hdf Doors including Frames (1500 X 2100 High), Wall Finish Works (Rendering and Painting), Fixtures and Fittings: Construct and Install Purpose Made 2nr Shelves with Multiple Compartments, 1nr/6nr Shelves with 4 Compartment (400/800 X 2500mm), 2nr Open Lockers on Both Shelves, 2nr Ground Lockers, 4nr Refurbish Modelling Table to Add Additional Shelves Wall Mounted (2800 X 800mm), Electrical Works, Furnishing: 100nr Drawing Tables with Moveable Iron standa3, 100nr Purpose Made Quality Round Stools as Per Submission. SUBMISSION OF TENDER DOCUMENTS Prospective bidders are to submit two (2) hard copies of pre-qualification documents of the technical bids packaged together in one sealed envelopes and clearly marked as Technical Bid addressed to: The Vice-Chancellor, Lagos State University of Science and Technology, Ikorodu, Lagos. The reverse of each sealed envelope should bear the name and address of the bidder and drop in the designated Tender Box at the Council Chamber, Ikorodu Campus not later than 12:00noon of 9th February, 2026. 5.0 OPENING OF PRE-QUALIFICATION DOCUMENTS The technical bids will be opened immediately after the deadline of the submission at 12:00noon 9th February, 2026 at the Council Chamber, Ikorodu Campus in the presence of bidders or their representatives. Bidders not represented would have its bids kept unopened. Please, ensure that you sign the Bid submission Register at the Directorate of Procurement, Ikorodu Campus as the University will not be held liable for misplaced or wrongly submitted bids. 6.0 GENERAL INFORMATION a. Bids must be in English language and signed by an official authorized by the bidder; b. Bids submitted after the deadline for submission would be returned un-opened; c. All cost will be borne by the bidders; d. The Technical Bids will be opened in the presence of Bidders or their representatives, CSOs in the areas of Anti-Corruption Transparency and Private Professional bodies and covered by video recording; invitation link will be sent to bidder who chooses to join the bid opening online; e. All documents for submission must be bounded properly numbered and duly signed on each page with a well-arranged table of content; f. Bid documents that are not clearly marked with bidders identity will not be opened; g. Note that tender document not clearly printed/photocopied will be disqualified h. Only pre-qualified bidders will be invited at a later date for collection of Tender documents; i. The Lagos State University of Science and Technology Ikorodu, Lagos is not bound to pre-qualify any bidder and reserves the right to annul the Procurement process at any time without incurring any liabilities in accordance with Section 28 of the 2007 Public Procurement Act. Tender Link : https://etenders.com.ng/lagos-state-university-of-science-and-technology-ikorodu-lagos-state-invitation-for-pre-qualification-for-year-2025-physical-infrastructure/
