• Planting Of High, Medium And Low Greenery Is Planned According To: The Attached Technical Design.• The Area For Flower Beds Should Be Cleared Of Turf, Weeds And Larger Stones. Dismantle Elements Disturbing The Ground (Such As Old Concrete Poles). Level The Ground And, If Necessary, Supplement With Fertile Soil. Dispose Of The Resulting Waste. Separate The Flower Beds From The Adjacent Surface With A Steel Eco-Bore. Details In The Design Documentation And On Designs No. 1 And 2. • Work Performed Manually, Using Mechanical Equipment Or Technical Devices, Is Carried Out In A Way That Causes The Least Harm To The Surroundings, With Particular Attention To The Existing Tree Stand. There Are Two Natural Monuments Located In The Area Of The Planned Investment. It Is Prohibited To Carry Out Earthworks, Compact The Soil, Store Heavy Materials, Pour Out Construction Washings And Other Pollutants Within The Tree Protection Zone (Sod) And Carry Out Work That Could Damage The Tree Trunk And Crown. In The Case Of Work With Mechanical Equipment Within The Remaining Trees, Board The Trunks In Accordance With The Specifications Described In Ordinance No. 29/2023 (Described Below). • Perform Spot Replacement Of The Soil For Planting As Indicated In The Design Documentation. Make Planting Holes Manually Or Mechanically, And Plant Plants Manually, Without The Use Of Mechanical Equipment. Use Fertile Garden Soil To Fill The Holes. • Stake The Trees With 3 Fi Stakes. 8Cm High, 2.5M And Install Trunk Covers Against Trimming (Treeprotector). Trees Tied To Stakes With Gardening Tapes. Make Irrigation Bowls Sprinkled With Leaf Chips. • After Planting The Plants, Spread The Beds With Leaf Chips With A Layer Thickness Of 6-8 Cm. • Reclaim The Lawn. In The Area Intended For Sowing, Sow The Lawn Mixture With White Clover Seeds. Carry Out The Work In Accordance With The Recommendations Of The Design Documentation.• After Planting, Water The Plants Abundantly, Twice With Water.• Create A Gravel/Drainage Surface According To Indications In The Design Documentation.• Install Houses For Beneficial Insects.• Make A Separation Barrier For Flower Beds At The Municipal Market According To. Indications In The Design Documentation.• Make Walking Paths.• Clean The Area After The Work, Clear The Sidewalks Of Soil And Plant Remains.• Prepare As-Built (Surveying) Documentation.• The Works Should Be Carried Out In Such A Way That They Do Not Interfere With The Normal Use Of The Sidewalk Or Road By The Residents.• As Part Of The Concluded Contract, The Contractor Provides A 2-Year Warranty And Care (From The Moment Of Acceptance Of The Works) For The Plantings, Which Includes Replacing The Plants If They Are Damaged. Drying Out During The Warranty Period. Before Signing The Contract, The Contractor Will Submit A Completed Cost Estimate According To The Attached Bill Of Quantities.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
