Tenders Are Invited For Construction Of A Tourist Pier On The Pond In Mełgiew As Part Of The Project Development Of Tourist Infrastructure In The Mełgiew Commune

1. The Subject Of The Order Is The Implementation Of The Task Entitled: Construction Of A Tourist Pier On The Pond In Mełgiew As Part Of The Project Development Of Tourist Infrastructure In The Mełgiew Commune. As Part Of The Order, The Construction Of A Water Facility Was Designed - A Recreational Pier On The Mełgiew Ii Pond On The Plot No. 541, With Dimensions: 25.0 M X 3.0 M + 10.0 M X 5.0 M, With An Area Of ​​125 M2.2. The Designed Bridge Will Consist In Particular Of: 1) Wooden Frame Structure With 30 Cm Piles, 2) Bridge Deck - Thick Logs. 5 Cm, Anti-Slip Curb, 3) Wooden Protective Barriers: Wooden Posts And Handrails, 4) Wooden Cross-Braces And Beams, 5) Screws And Steel Connectors, 6) Additional Equipment: Entrance Ladders - 3 Pcs. And Rescue Station - Box Equipped With A Rescue Ring, A Dart And A Boat Hook - 1 Set. 3. The Order Must Be Performed In Particular In Accordance With The Design Documentation And The Technical Specification For The Execution And Acceptance Of Works Constituting Annex No. 12 To The Swz, Taking Into Account The Provisions Of The Swz And The Contract (Annex No. 10 To The Swz).4. A Detailed Description Of The Subject Of The Order Includes In Particular: 1) Design Documentation, 2) Technical Specification For The Execution And Acceptance Of The Works. Due To The Fact That The Contractors Remuneration Indicated In The Offer Will Be A Lump Sum, When Pricing The Offer, The Contractor Should Rely On The Scope Indicated In The Design Documentation Referred To In Point 1) And The Technical Specification For The Execution And Acceptance Of The Works Referred To In Point 2). The Contractor Is Obliged To Carefully Check The Number Of Works Against The Design Documentation. Any Lack Of Necessary Works Resulting From The Design Documentation In The Bill Of Quantities Does Not Release The Contractor From The Obligation To Perform Them Based On The Design At The Contract Price. The Contractor Has The Right To Adjust The Quantity Of Works In The Bill Of Quantities According To His Own Calculations Based On The Design And Technical Specifications. Bills Of Quantities Are Of An Auxiliary Nature. The Occurrence, During The Implementation Of The Contract, Of Works Not Included In The Bill Of Quantities Or Works In A Larger Quantity Than That Accepted In The Bill Of Quantities Will Not Entitle The Contractor To Demand Additional Remuneration - If These Works Were Included In The Documentation Referred To In Point 1) Or 2). If The Description Of The Subject Of The Order Includes A Provision Resulting From Knr Or Knnr Indicating The Need To Use Specific Equipment With Specific Parameters In The Execution Of The Order, The Ordering Party Allows The Use Of Other Equipment Provided That It Will Ensure The Achievement Of The Assumed Design Parameters And Will Not Cause The Risk Of Non-Compliance Of The Work Performed With The Technical Documentation.5. The Subject Of The Order Must Be Performed In Accordance With Applicable Legal Provisions,

Refer document

FileName	File Description
Global Tender Document	c795f2ab-fe42-4fe8-8d3e-d912b7e51bb8.html