The Extreme Route Of The Rope Park Should Be Dismantled And Then New Elements Should Be Installed On The Same Trees, But Avoiding The Existing Roots Of The Rope Park Elements In The Trees. This Operation Is Intended To Maintain The Good Condition Of The Trees Used To Assemble The Rope Park. The Obstacles Of The Rope Park Should Be Installed In Accordance With The Attached Design. The Route Should Be Built Based On The Pn-En 15567-1 Standard Sports And Recreational Equipment - Rope Courses - Part 1: Safety Requirements And Test Methods. The Extreme Route Is To Consist Of 17 Horizontal Obstacles, 3 Vertical Obstacles (Entrances, Descents, Approaches Between Platforms) And 19 Wooden Platforms. The Route Is To Be Equipped With A Continuous Belay System. The Slope Of The Zip Line Ropes Should Be Selected So That The Braking Occurs Automatically - By Gravity. The Fall Should Not Be Greater Than 4.5% (The Difference In Height Between The Rope Attachment At The Take-Off And The Landing Rope Attachment Cannot Be Greater Than 4.5% Of The Distance Between The Trees). The Mounting Height Of Platforms And Obstacles Should Be Selected According To The Terrain And Adjacent Routes. It Is Assumed That The New Location Of The Route Elements In The Trees Will Be Higher Than The Current Location. All Works Should Be Performed In Accordance With The Detailed Description Of The Subject Of The Order And The Draft Contract.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
