Tenders Are Invited For Construction Work – Heat Supply And Cooling Systems

Construction Work – Heat Supply And Cooling Systems. The Altenahr Municipality Intends To Renovate The Realschule-Plus In Altenahr, Which Was Flooded During The Flood Disaster In July 2021. Structure The Existing Buildings Are Of Solid Construction. The Building Has Three Floors And Parts Are Single Floor. Below The Ground Floor There Is A Heating Center And An Extensive Crawl Space With A Low Ceiling Height. The Roof Surfaces Consist Of Hipped, Gable, Pitched And Flat Roofs. The Roof Areas Will Be Partially Demolished And Replaced. The Outer Walls Are Covered With Etics, Which Has Already Been Dismantled To A Height Of Approx. 4.50M Above The Ground And Will Be Completely Renewed. The Exterior Window And Door Systems, The Drainage Of All Roof Areas, As Well As The Interior Fittings And Building Technology Will Also Be Completely Renewed. The Building Will Also Have A Lift For Barrier-Free Access To The Upper Floors. The Project Involves The Installation Of A Heat Pump In Combination With Radiant Ceiling Panels And Underfloor Heating. The Heat Source Is Provided Via A Cold Local Heating Network. The Main Services Include: Installation Of The Heat Pump: The Heat Pump Is Installed In A Suitable Room And Connected To The Cold Local Heating Network. It Is Used To Generate Heat And Ensures An Energy-Efficient Conversion Of External Thermal Energy Into Heating Energy For The Building. Installation Of Radiant Ceiling Panels: Radiant Ceiling Panels Are Provided For Heating Most Of The Rooms Such As Classrooms And Lounges. The Planning And Execution Takes Place According To The Specified Room Dimensions And Heating Requirements. Installation Of Underfloor Heating: Underfloor Heating Is Installed In The Building, Which Distributes The Heat Generated Evenly Throughout The Rooms. The Planning And Execution Takes Place According To The Specified Room Dimensions And Heating Requirements. Connection To The Cold Local Heating Network: The Interface For The Connection To The Cold Local Heating Network Is Installed. This Includes Setting Up A Shut-Off Device To Ensure The Safe And Efficient Transfer Of Thermal Energy Into The Heating System. The Shut-Off Allows The Heat Supply To Be Separated And Regulated. All Work Is Carried Out In Accordance With Applicable Standards And Regulations, Taking Into Account High Efficiency And Sustainability Of The Heating System. Details Can Be Found In The List Of Services.