Steel Pipe, Profile 50X30 Mm. Gost 32931-2015. Wall Thickness: Not Less Than 2 Mm. Steel Grade: St3. Type Of Production: Electric Welded. Length: No More Than 6 Meters. (To Carry Out Work On Bp 101 Routine Repairs For The Installation Of Spillway Fencing At The Shokai Reservoir), Rags. Composition: Mainly Cotton, Without Synthetic Impregnations, Rubber, Buttons, Zippers. Absorbency (Hygroscopicity): Excellent Absorption Of Water, Oils, Paints, Solvents. Dimensions: In Rolls. Density: No Less Than 120 No More Than 300 G/M². St Rk 1160-2002 (To Perform Work On Bp 101 Painting Of Enclosing Metal Structures Of The Yntymak Reservoir Waterworks), Steel Pipe, Square Carbon Steel 80X80 Mm. Gost 32931-2015. Wall Thickness: Not Less Than 3 Mm. Steel Grade: St3type Of Production: Electric Welded. Length: No More Than 6 Meters. (To Carry Out Work On Bp 101 Routine Repairs For The Installation Of Spillway Fencing At The Shokai Reservoir), Primer Gf 017. Color: Dark Brown. Composition: Based On Alkyd Varnish And Melamine-Formaldehyde Resin. Mass Fraction Of Non-Volatile Substances: Not Less Than 49-55%. Conditional Viscosity: No More Than 35-65 S (According To Vz-246, 4 Mm). Grinding Degree: No More Than 40 Microns. St Rk Gost R 51693-2003 (To Perform Work On Bp 101 “Routine Repairs For The Installation Of Spillway Fencing At The Shokai Reservoir”), Steel Pipe, Profile 80X40 Mm. Gost 32931-2015. Wall Thickness: Not Less Than 2 Mm. Steel Grade: St3. Type Of Production: Electric Welded. Length: No More Than 6 Meters. (To Carry Out Work On Bp 101 Routine Repairs For The Installation Of Spillway Fencing At The Shokai Reservoir), Primer Gf-021. Appearance Of The Coating: Matte Or Semi-Gloss. Drying Time To Degree 3 (20±2°C): No More Than 24 Hours. Drying Time To Degree 3 (105±5°C): No More Than 35-40 Minutes. Mass Fraction Of Non-Volatile Substances: 54-60%. Consumption Per Layer: 45-100 G/M². Thickness Of One Layer: 15-20 Microns. St Rk Gost R 51693-2003. (To Carry Out Work On Bp 101 Painting Of Enclosing Metal Structures Of The Yntymak Reservoir Waterworks), Cement Shpts-400. Composition: Portland Cement Clinker, Gypsum And Granulated Blast Furnace Slag (20-80%). Strength: Grade 400 Strength Is At Least 39.2 Mpa (Approximately 400 Kg/Cm²). Frost Resistance: Average, Water Resistance, Sulfate Resistance. St Rk 3716-2021 (To Perform Work On Bp 101 “Routine Repairs For The Installation Of Spillway Fencing At The Shokai Reservoir”)
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
