Tenders Are Invited For Partial Renovations Of Municipal And Internal Roads With Bitumen Surfaces In The Sędziszów Małopolski Commune.

1. The Subject Of The Order Is The Performance Of Partial Renovations On Municipal And Internal Roads With Bitumen Surfaces In The Sędziszów Małopolski Commune In 2026.2. The Subject Of The Order, The Type And Quantity Of Works To Be Performed Under The Order Are Described In Detail In The Following Documents: Detailed Technical Specification Sst And Bill Of Quantities, Which Are Annexes To This Swz. 3. The Scope Of The Task Includes The Following Works: 1) Partial Renovation Of Bituminous Surfaces With A Mineral-Asphalt Mixture, Standard Ii, With Mechanical Edge Cutting - 310 T2) Partial Renovation Of Bituminous Surfaces With A Mineral-Asphalt Mixture, Standard Ii, Without Mechanical Edge Cutting - 90 T3) Partial Renovation Of Surfaces Hardened With Basalt Grits And Emulsions Asphalt, Potholes 2 Cm Deep - 90 M24) Earthworks With A Backhoe Excavator With Transport Of Excavated Material Over A Distance Of 1 Km Thick. Category Iii-Vi -90 M35) Construction Of A Drainage Layer From Sand Gravel, Layer Thick. 15 Cm - 180 M26) Profiling Of The Crushed Stone Surface - 180 M27) Construction Of The Foundation From Wedged Crushed Stone With A Thickness Of Layers After Compaction 20 Cm - 180 M28) Construction Of A Wearing Course Made Of Mineral And Bituminous Mass, Standard Ii, 5 Cm Thick Layer Along With Profiling And Compaction Of The Existing Substrate - 180 M29) Construction Of Transverse Aggregate Filters - 10 M10) Construction Of Curbside Drains From Paving Stones, Thickness. 6 Cm Of Two Rows Of Cubes On A Cement And Sand Ballast, Thickness. 6 Cm (With Cuffing And Cutting The Edges) – 10 M11) Vertical Adjustment Of Wells And Sewage Grates - 5 Pcs.4. All Proper Names Of Materials And Devices Used In The Tender Documentation Are Provided As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard.5. All Proper Names Of Materials And Devices Used In The Sst, Their Types And Symbols Are Adopted For Reasons Of The Level Of Detail In Terms Of Compliance With Polish Standards And Technical And Operational Calculations. They Should Therefore Be Treated As Meeting The Minimum Technical Parameters.6. The Ordering Party Will Agree With The Contractor The Scope Of Works Based On Orders Submitted Via E-Mail, Including Renovations Of Individual Roads. The Place Of Renovation And The Scope Of Works Will Be Indicated Each Time By An Authorized Employee Of The Ordering Party. After Receiving The Order, The Contractor Is Obliged To Start Carrying Out The Renovations In Accordance With The Deadline Specified In The Offer Form In The Response Time Criterion And To Complete The Works Within The Time Specified In The Order. The Ordering Party Divided The Order Into 2 Order Execution Periods: 1) Period I (Spring) - From The Date Of Signing The Contract To June 1, 2026. During This Period, The Contractor Will Complete All Works Ordered By The Ordering Party By April 15, 2026.2) Period Ii (Summer-Autumn) - From June 2, 2026 Until The End Of T