Tenders Are Invited For Repair Of Roads And Streets With Crushed Stone And Dirt Surfaces In The Nadarzyn Commune

Part No. 1 - Repair Of Roads And Streets With Crushed Stone Surfaces In The Nadarzyn Commune.1) Scope: Laying A Layer Of Reclaimed Material And Surface Consolidation With Asphalt Emulsion With Basalt Grit Or Renovation Of Bituminous Surfaces Using Sma Surfaces With Delivery, Installation And Mechanical Compaction,2) The Subject Of The Order In The Scope Of Part No. 1 Includes, Among Others: A) Preparation Of Existing Crushed Stone Surfaces By Profiling Them - Included In The Price Of Laying The Reclaimed Layer, B) Supplementing The Base With Mechanically Stabilized Crushed Aggregate Of The 31.5-63 Mm Fraction For Road Fragments With A Ground Surface - Remuneration According To The Offer Price, C) Delivery, Laying Together With Compaction Using A Road Roller On The Indicated Roads With A Crushed Stone Surface In The Nadarzyn Commune, Reclaimed From Mineral-Asphalt Masses With Waste Code 17 03 02, Resulting From Work Related To Direct Milling Of The Wearing Asphalt Layer (Recycling Recovery), D) Single Surface Consolidation Using Asphalt Emulsion And Basalt Grit 3-5 Mm, E) Alternatively, Laying A Layer Of Medium-Thick Sma Masses. 5 Cm, F) Construction Of Roadsides From Mechanically Stabilized Crushed Stone Aggregate, 4-31.5 Mm Thick. 7 Cm Along With The Removal Of Bushes Up To 10 Percent Of The Area, G) Preparatory And Cleaning Works Necessary For The Proper Execution Of The Subject Of The Order And Putting Into Operation After The Completion Of The Works - Included In The Price Of The Roadsides, H) Collection From The Mzdw Otwock - Piaseczno Area And Transport To The Companys Own Landfill And Mechanical Processing (Sorting, Grinding) 974 Tons Of Reclaimed Mineral-Asphalt Mass With Waste Code 17 03 02, Generated As A Result Of Work Related To Direct Milling Of The Asphalt Wear Layer (Recycling Recovery). The Minimum Length Of One Section Of The Surface Is 50 M, The Width On One Section Is Constant Within The Limits Of 3.5 - 5 M. The Ordering Party Does Not Allow Destruction Resulting From The Crushing Of Slabs Cut From The Asphalt Surface And Lumps Obtained From The Slabs. Reclaimed Asphalt Should Have No Admixture Of Foreign Materials, Including No Base Made Of Natural Or Artificial Aggregates. The Thickness Of The Surface Layer After Compaction Is Not Less Than 9 Cm. The Work Should Be Performed In Favorable Weather Conditions. Before Laying The Reclaimed Surface, The Existing Crushed Stone Surface Should Be Profiled With A 2% Slope On Both Sides. A 10 Cm Thick Layer Of Reclaimed Material Should Be Placed On The Surface Prepared In This Way And Compacted With A 15 Mg Roller. After Laying The Layer Of Reclaimed Material, The Roadside Should Be Shaped Stabilized With Crushed Aggregate 0/31.5 Mm At A Width Of 0.5 M, Compacted And With A Slope Of 4-6%, And The Adjacent Area Should Be Tidied Up; 3) The Order Will Be Implemented Successively, In Accordance With The Ordering Partys Instructions. The Task Will Be Carried Out In Stages In Accordance With