Consumables For The Pcs-2 Plasmapheresis Device Are Included. Consumables For The Plasmapheresis Apparatus Included: A Disposable Set Of Consumables Consisting Of A Bell (For Receiving Plasma), A Container For Collecting Plasma (Adapted For Replenishment With Saline Solution), A Line For Collecting Plasma, A Container For Preservation (With A Solution Of Sodium Citrate 4%, 250 Ml), A Fistula Needle With An Adapter For A Test Tube For Collecting Blood Samples, Sterile, Single Use, 16G, Solution For Continuous Hemodiafiltration. Potassium 0-4 Mmol/L, 5 L. (Lactated Hemofiltration Solution 2 Mmol/L, 5 L Bags. Hemofiltration Solution Is Clear, Colorless Or Slightly Yellowish. The Ready-To-Use Solution Is An Electrolyte Solution Containing Glucose And A Lactate Buffer Used To Maintain And/Or Correct Fluid And Electrolyte Balance During Hemofiltration. During Hemodialysis, Water, Salts, Uremic Toxins, Electrolytes And Other Low Molecular Weight Compounds In A Gradient Diffusion Is Exchanged Between The Blood And The Dialysis Fluid. The Solution Can Also Be Used For Hemodialysis. A Solution Based On Lactate Buffer For Intravenous Administration Is Also Used As A Dialysis Solution For Continuous Procedures In Acute Renal Failure. The Injected Lactate Is Metabolized To Bicarbonate. Electrolytes Na+, K+, Mg2+, Ca2+, Ci- And The Precursor Of Bicarbonate - Lactate. Correction Of Fluid And Electrolyte Homeostasis (Circulating Blood Volume, Osmotic Balance) And Acid-Base State (Glucose) Helps To Avoid Disturbances In Energy Metabolism And Maintain The Physiological Values Of Blood Carbohydrates. Composition Of 1 Liter Of Solution: Sodium Chloride - 5.961 G, Potassium Chloride - 0.1491 G, Calcium Chloride Dihydrate - 0.2205 G, Magnesium Chloride. Hexahydrate - 0.1017 G, Sodium Lactate (50% Solution) - 8.52 G, Dextrose Monohydrate - 1.1 G. Ionic Composition And Theoretical Osmolarity Of The Finished Solution: Sodium 140 Mmol, Potassium - 2 Mmol, Calcium - 1.5 Mmol, Magnesium - 0.5 Mmol, Chloride - 108 Mmol, Glucose - 5.5 Mmol, Lactate-38 Mmol)., High-Flow Capillary Dialyzer With A Membrane Area Of 2.0-2.2 M2. To The Fresenius 5008 S! Type-Capillary. Synthetic Membrane – Polyamide Copolymer. Membrane Area 2.0-2.2 M2. Filling Volume No More Than 123 Ml. Ultrafiltration Coefficient (Measurement Conditions: Bovine Blood, Hematocrit 32%, Blood Protein 60 G/L, Temperature 37 C) From 14 To 16 Ml/Hour * Mm Hg. Coa For Urea Is Not Less Than 1265. The Internal Diameter Of The Fiber Is Not Less Than 215Μm. The Fiber Wall Thickness Is At Least 50 Μm. The Maximum Transmembrane Pressure Is Not Less Than 600 Mmhg. Substance Clearance Is Not Less Than: Urea 275 Ml/Min, Creatinine 246 Ml/Min, Phosphates 218 Ml/Min, Vitamin B12 – 131 Ml/Min. (With Blood Flow 300 Ml/Min, Dialysate Flow 500 Ml/Min). Sterilization Method: Autoclaving., Filter For Dialysis Fluid For Hemodialysis Machine Fresenius 5008 S!. Advantages: Preparation Of Ultra-Pure Dialysis Fluid. Location: Directly On The Dialysate Supply Line. Checking The Integrity Of The Filter During Self-Diagnosis Of The Device Performance Characteristics: Endotoxin Retention > 106. Period Of Use/Filter Exchange - Max. 12 Weeks Or 100 Onlineplus Procedures Or Failure To Pass The Integrity Test. Technical Data: Filtration Rate ≥ 300 Ml/H*Mmhg. ≥ 3.75 L/Min*Bar. Maximum Filtration Pressure Is 2 Bar. Body Material – Polypropylene, Sealant Material – Polyurethane. Connection To The Device - Diafixtm Lock System. Surface Area 2.2 M2. Weight 170 G., Citric Acid Solution For Treating Artificial Kidney Devices, 6 L. To The Fresenius 5008 S! Citric Acid 50% Solution In 6 Liter Canisters. Used For Heat Disinfection, Cleaning, Decalcification Of Hemodialysis Machines, By Washing. Effective At Temperatures From 60 To 83 C, Depending On The Recommendations Of Hemodialysis Machine Manufacturers. It Has Bactericidal, Fungicidal, Tuberculocidal, Antiviral (Including Parvoviruses, Hepatitis B Virus, Hepatitis C Virus, Hiv) Effects. Regulates Ph. Physical Data: Transparent Colorless Liquid Ph: 1-2. Density (20 C): 1.2 G/Ml. Ingredients: 1000 Ml Contain 500 G Of Anhydrous Citric Acid. For Disinfection, 120 Ml Of Solution Is Used. Disinfection Time, Depending On The Configuration Of The Artificial Kidney Device And The Manufacturer’S Recommendations, Is From 15 To 20 Minutes, Tablet Salt For Water Treatment System In 25 Kg Bags (For Hemodialysis), Set Of Lines For Hemofiltration And Hemodialysis For The Diapact Crrt Device. The Products Are Made Of Polymer Plastic Containing Plasticized Polyvinyl Chloride. 90% Of The Products Are Plasticized Polyvinyl Chloride Tubes Of Various Configurations With Clamps, Valves And Traps, As Well As Bags With A Capacity Of Up To 7000 Ml For Collecting Waste Solution. Sterilization - Ethylene Oxide. A Set Of Sterile Lines In The Form Of An Installation Set For Hemodialysis And Hemofiltration Procedures Is Compatible With The Diapact Crrt Device For Extrarenal Blood Purification Procedures. Trunk Sets Are Marked To Avoid Errors During Their Installation. The Same Set Of Lines Can Be Used For Both Predilution And Postdilution Hemofiltration. The Versatility Of The Lines Allows You To Change The Type Of Procedure Directly During Treatment. A Separate Set Of Lines And Filters Allows Replacement (For Example, In Case Of Thrombosis) Without Additional Costs. Equipment And Technical Characteristics: 1) Arterial Blood Supply Line, Including: Pump Segment, Air Trap, Leads For Measuring Blood Pressure And Pbe; 2) Venous Blood Supply Line, Including: An Air Trap, A Lead For Measuring Venous Pressure - Presence; 3) Dialysate Inlet Line (Substitute Line), Including: Pumping Segment, Heating Segment, Tap For Measuring Dialysate Pressure; 4) Output Dialysate Line (Ultrafiltrate Line), Including: Pump Segment, Pressure Measurement Outlet; 5) Bag For Collecting Liquid (Dialysate/Filtrate) 7000 Ml – 2 Pcs; Clamps On All Lines; Universal Connectors For Dialyzers, Hemofilters And Solution Bags From Various Manufacturers. Sterilization - Gamma, Blood Lines For Hemodialysis In The Artery-Vein Set For The Fresenius 5008 S Device! The Set Of Blood Lines For Hemodialysis Is Sterile, Single Use. Blood Lines In An Artery-Vein Set For Use In Hemodialysis Machines During A Standard Hemodialysis Procedure. Technical Characteristics: Type Material: Blood Supply Line: Soft Pvc For Medical Purposes. Connectors And Other Components: Polycarbonate, Pvc (Polyvinyl Chloride), Abs (Acrylonitrile Butadiene Styrene), Pe (Polyethylene), Pa (Polyamide); Dimensions: Pump Segment 8.0 Mm, Venous Bubble Trap 22 Mm, Filling Volume 158 Ml. Sterilization With Ethylene Oxide. Connectors Must Be Luer-Lock Type And Have Color (Red/Blue) Markings.
