Tenders Are Invited For Hut Hospital - Extension Including Fresh Kitchen - Pv System

Pv System For The Expansion Of The Hüttenhospitalthe Pv System Consists Of Two Subsystems (17 Kwp And 11 Kwp) With A Total Output Of Approx. 30 Kwp Is To Be Installed On The Roof Of The Main Building Of The Hüttenhospital In A Southerly Orientation. The Building Height Is Approx. 17 M. Safety Measures For The Installation Of The Modules On The Roof, The Contractor Must Take Safety Measures, Which May Have To Be Coordinated In Advance With The Building Owners Safety Code. (There Is No Rope Safety System Or Railing Installed On The Roof Over Which The Fitters Can Secure Themselves. For The Installation Of The Modules And Cabling, The Contractor Must Calculate Other Safety Measures, E.G. Crane Or Temporarily Installed Ones Railing.)System Descriptionfor Overvoltage Protection, Overvoltage Protection Elements Must Be Taken Into Account In The Input (Dc) Of The Inverter. Overvoltage Protection Elements Must Also Be Taken Into Account For The Output Of The Inv (Ac). The Surge Protection Must Be Included In The Potential Equalization. The Inverters Are Mounted On Special Steel Constructions Directly Below The Corresponding Pv System On The Loft. There Is A Technical Room With Sub-Distribution (3Rd Floor) Under Each Inverter. The Systems Feed Directly Into These Sub-Distributions. The Electricity Generated Should Be Consumed As Much As Possible. Any Electricity Generated Beyond This Is Fed Into The Public Grid. Since This Is Not An Isolated Solution, A Formal Meter Application Must Be Submitted To The Utility Company By The Installer Of The System. Na Protection Must Also Be Taken Into Account. The Dimensions Of The Solar Modules Have Been Selected With Regard To The Available Roof Area. To Check Equivalence, The Make And Type Must Be Stated. Design In Accordance With Din Vde 0100 - 712, Din Vde 0100- 410, Vde-Ar-N 4105, Bdew And Tab Of The Utility Company. Details Of The Design Can Be Found In The List Of Services.