Bids Are Invited For Price Record For Future And Eventual Acquisition Of General And School Furniture, Covering Not Only The Supply Of Items, But Also Delivery, Assembly And Technical Assistance Services, With Full Coverage Against Manufacturing Defects, Including The Supply Of Parts Necessary To Correct Any Nonconformities Identified During The Warranty Period.
Bids Are Invited For Price Record For Future And Eventual Acquisition Of General And School Furniture, Covering Not Only The Supply Of Items, But Also Delivery, Assembly And Technical Assistance Services, With Full Coverage Against Manufacturing Defects, Including The Supply Of Parts Necessary To Correct Any Nonconformities Identified During The Warranty Period.
Lot 1 - School Set – Table And Chair For Student – Size 6 Table The Table Must Have Dimensions Of 600 The Table Top Must Have A Rectangular Shape, Made Of Mdp Or Mdf With A Nominal Thickness Of 19 Mm. At Least Four Nuts With Machine Thread In Diameters M6 Or M8 Must Be Incorporated Into The Lower Face, Intended For Fixing The Base Structure. Adhesion And Resistance To Removal. There Must Be Centralized Front Machining For Installing A Pencil Holder, Fixed To The Top By Two Screws, With A Minimum Useful Depth Of 10 Mm. The Lower Face Of The Top Must Be Covered With Low Pressure Melamine Paper (Bp), Providing Protection Against Humidity And Deformation. High Pressure Melamine Laminate (High Pressure Decorative Laminate – Hpl, Formica Type), With A Minimum Thickness Of 0.7 Mm, Glued Using A Process That Ensures Permanent Adhesion And A Uniform Finish. The Metallic Structure Must Be Composed Of Double Columns At Each End, Made Of Cold-Rolled Carbon Steel Tube With A Seam, With A Rectangular Section 20 X 40 Mm And 1.5 Mm Thick; The Longitudinal Beam Must Be Manufactured From An Oblong Tube Measuring 29 Blue.The Feet Must Be Made Of Cold-Rolled Carbon Steel Tube With Stitching, With A Circular Section Of 38 Mm (1½”) And A Thickness Of 1.5 Mm......, Lot 1 - School Set - Student Table And Chair - Size 5 Table The Table Must Have Dimensions Of 600 Height), Intended For Fixing The Base Structure. The Edges (Tops) Of The Top Must Be Finished With Pvc Or Abs Edge Tape, Which Ensures Perfect Adhesion And Resistance To Peeling. There Must Be Centralized Front Machining For The Installation Of A 5 Mm Pencil Holder. The Longitudinal Beam Must Be Manufactured In A Tube With An Oblong Section Of 29 The Structure Must Receive Electrostatic Painting In Gray Color, With Plastic Tips Injected In Green Color. ...., Lot 1 - School Set - Table And Chair For Student - Size 4 Table The Table Must Have Dimensions Of 600 X 450 X 644 Mm (Width X Depth X Height), With A Minimum Usable Depth Of 10 Mm. The Lower Face Of The Top Must Be Covered With Low Pressure Melamine Paper (Bp), Providing Protection Against Humidity And Deformation. The Upper Face Must Be Covered With High Pressure Melamine Laminate (High Pressure Decorative Laminate – Hpl, Glued Using A Process That Ensures Permanent Adhesion And Uniform Finish. The Metallic Structure Must Be Composed Of Double Columns At Each End, Constituting A Single Piece...., Lot 1 - School Set – Table And Chair For Student – Size 3 Table The Table Must Have Dimensions: 600 X 450 X 594 Mm (Width X Depth
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
