Bids Are Invited For Possible And Future Acquisition, Supply, Installation And Commissioning Of New Fire Extinguishers, Fire Extinguisher Shelters, Emergency Signage Signs And Emergency Lighting Luminaires, Including All Materials, Labor, Tools, Equipment And Other Necessary Inputs, Training Of Firefighters And Electrical And Locksmith Services.

Extinguisher Pqs 6Kg Abc 3A 40-B : Extinguisher Pqs 6Kg Abc 3A 40-B :C – Load Type: Dry Chemical Powder (Pqs) Load Capacity: 6 Kg Fire Class: Abc Direct Pressurization, With Built-In Expelling Gas Cylinder Made Of Carbon Steel, Minimum Jet Range Of 4 Meters, Discharge Autonomy Of 12 To 15 Seconds With Red Electrostatic Painting Pressure Gauge With Operational Range (Green) Visible Hose With Nozzle Diffuser Finish And Components In Material Resistant To Corrosion And Impacts Sealing And Seal Of Inmetro Compliance With O Support For Wall Mounting Photoluminescent Signage According To Applicable Standards Support Installation Height: Between 1.20 M And 1.60 M From The Finished Floor To The Handling Handle Maximum Travel Distance: According To The Dimensioning Of The Prevention Project Compliance Standards: Compliance With Nbr 15808 And Guidelines From The Military Fire Department Of Minas Gerais. Including Labor Such As Drilling, Fixing The Supports, Leveling And Checking In Accordance With Cbmmg Standards. Minimum Luminous Flux: 200 Lumens (Or According To Project Sizing).Minimum Autonomy: 2 (Two) Continuous Hours In Emergency Operation.Power Supply: 127V Or 220V (Automatic Bivolt), With Frequency 60Hz.Sealed Rechargeable Internal Battery, Type Ni-Cd, Li-Ion Or Lead-Acid, Protected Against Overload And Total Discharge.Enclosure In Flame-Retardant, Impact-Resistant Material, Preferably In Self-Extinguishing Abs.Minimum Protection Index: Ip20 (Internal Area) Or Ip66 (External Area, If Applicable).Color Temperature: 6,000K To 6,500K (Cold White).Installation System: Overlapping On Wall Or Ceiling, With Fastening By Screws And Direct Connection To The Electrical Network. Automatic Recharge System With Battery Status Indicator Led. Protection Against Overload And Short Circuit, Guaranteeing Safe Visibility In The Event Of A Lack Of Electricity And Allowing Adequate Evacuation Of School Units. Certification: Equipment Complies With Nbr 10898:2013 And Standards Of The Military Fire Department Of The State Of Minas Gerais. Including Fixing, Electrical Connection, Autonomy Test And Compliance With Abnt Nbr 10898., Shelter For Fire Extinguisher, Application: Protection Of Portable Fire Extinguishers In Internal Or External Areas, Depending On The Needs Of The Environment. Cabinet Material: Corrosion-Resistant Carbon Steel Sheet Or High-Resistance Fiber/Composite (For External Areas Or Subject To Weather). Treatment And Finish: Electrostatic Painting In Standard Fire Safety Red Color Or Naturally Flame-Resistant/Self-Extinguishing Material, When Not Metallic. Pressure Gauge And Fire Extinguisher Seal.Door With Front Opening And Closing System By Simple Latch, Without Key, Easy To Use.Dimensions Compatible With 6 Kg, As Per Project Forecast (Example: Shelter Compatible With 6 Kg).