Bids Are Invited For Price Registration For Acquisition Of Materials Intended For Entomological Monitoring Using Ovitraps, In Accordance With Guidelines From The State Department Of Health (Sesa) And In Compliance With The Goals Agreed Within The Scope Of The Provigia Program, Aiming At Systematic Monitoring And Control Of The Aedes Aegypti And Aedes Albopictus Vector

Stereoscopic Microscope With Binocular Observation Tube. Field Of View Of At Least 20 Millimeters. Microscope Body Made Entirely Of Metal And Painted With Anti-Fungus Treatment. Magnification Range Can Vary Between 0.67X And 4.5X, Total Magnification From 6.7X To 45X And Working Distance Of At Least 110Mm. Pair Of 10X Inclined Eyepieces And Focusable Field Number F.N.22, With Aberration Correction, Wide Field, Independent Diopter Adjustment And Pre-Arrangement For Reticles, With Rubber Eyelets. Interpupillary Distance Varying Between 52 And 76Mm, With Independent Adjustments. Zoom Variation Button On The Left And Right Side With Magnification Indicator. Magnification Range Macro (2.5X) To Micro (250X-300X). Led Lighting System, Daylight White Or Blue. With A Duration Of More Than 6,000 Hours, A Power Of More Than 30 W And Simultaneous Diascopic (Transmitted) And Episcopic (Incident) Lighting, With Independent Controls Incorporated Into The Stand. Variable Incident Lighting Angle Adjustment. On/Off Switch With Button For Simultaneous Activation. Macrometric Button With Tension Adjustment Incorporated Into The Stand. Special Glass Plate With A Minimum Diameter Of 100Mm, For Transmitted, Reflected Light Or Simultaneous Use For Analysis. Voltage 100-240Vac Stabilized (Automatic Bivolt). Accessory: Brazilian Standard Connection Cable, Protection Cover And Instruction Manual Translated Into Portuguese (Brazil). Approved According To Current International Safety Standards. Authorized Technical Assistance In Brazil. Stereoscopic Microscope With Binocular Observation Tube. Field Of View Of, With, Case For Ovitrap Palettes. Acrylic Case For Collection And Safe Transport Of Ovitrap Palettes Containing Aedes Aegypti And Aedes Albopictus Eggs. It Must Be Made Of Clear Acrylic, Measuring Approximately 18 They Must Be Able To Accommodate Vertically And Suspended Inside, With A Distance Of Approximately 0.5 Cm From Each Other, To Avoid Contact Between Them And The Bottom Of The Case, Thus Avoiding Contamination Of A Positive Palette With A Negative One. Eggs Of Aedes Aegypti And Aedes Albopictus. It Must Be Made Of Transparent Acrylic, Contamination Of A Positive Palette With A Negative One., Complete Ovitrap Kit. 01 Black Plastic Vessel, With Holes Around The Vessel At A Height Of 300 Ml For Water Drainage, With A Volumetric Capacity Of Approximately 750 Ml, With Vinyl Adhesive Label (Waterproof). 01 Galvanized Metal Clips Nº 8 E 01 Eucatex Palette 13 X 3 Cm (Lxw) With A Smooth Side And A Rough Side. Complete Ovitrap Kit. 01 Black Plastic Vase, 01 Galvanized Metal Clips No. 8 And 01 Eucatex Palette 13 X 3 Cm (Lxw) With A Smooth Side And A Rough Side. The Vase Must Already Come With An Identification Label With The Following Characteristics: Trap Number, Municipality Logo, And Phrase Of Guidance To The Resident In Relation To The Trap. The Palettes Must Already Come Washed, Dried And With A Masking Tape Label Glued To One Of Their Ends Ready For Use. Complete Ovitrap Kit. 01 Black Plastic Vase, Dry And With A Masking Tape Label Glued To One Of Their Ends Ready For Use.