Bids Are Invited For Registration Of Prices For Future And Eventual Acquisition Of School Furniture To Equip The Teaching Units Of The Municipal Education Network To Meet The Needs Of The Municipal Department Of Education, Culture And Sports Of The Municipality Of Santanópolis/Ba

Set For Children With A Height Between 0.93 And 1.16M, Consisting Of A Table And A Chair. - Individual Table With Top In Mdp Or Mdf, Covered On The Top Side With High-Pressure Melamine Laminate And On The Bottom Side With Balancing Plate, Mounted On A Tubular Steel Structure. - Individual Stackable Chair With Seat And Back In Injected Polypropylene Or Molded Anatomical Plywood, Mounted On A Tubular Steel Structure, For Children Aged 3 Years, The Table Set And 4 Chairs, Seat Height Around 20-25 Cm, Table With Height Of 40-50 Cm, Safe Design (Rounded Edges, No Splinters) And Resistant Materials Such As Wood Or Non-Toxic Plastic, With Multifunctional Or Fixed Chairs, Top In Particleboard Wood (Mdp), With Rounded Corners, Thickness 15Mm With Top Coatings In High-Pressure Melamine Laminate With A Gray Textured Finish, Attached To The Structure With 5.0Mm Screws Ø X 45Mm Long. Book Holder Made Of Polypropylene, Affixed To The Structure By Ø 4.0 Mm X 10 Mm Long Rivets And With The International Symbol Of Recycling. Observations: Set Recommended For Elementary School. Recommended For Children From 1.46 To 1.76 M Tall., 15Mm Thick With Upper Coverings In High Pressure Melamine Laminate With Gray Textured Finish, Ø 0Mm X 45Mm Long. Book Holder Made Of Polypropylene, Ø 0 Mm Column And Longitudinal Beam In Oblong Tube 29 Approximate Dimensions: Cja-06 (W X D X H) 600 X 450 X 760 Mm; Chair: Seat And Back Made Of Polypropylene And Fixed To The Structure By Foam Rivets. Set For Teachers Consisting Of A Table And A Chair. - Table With Top In Mdp Or Mdf, Covered On The Upper Face With High Pressure Melamine Laminate And On The Lower Face With Balancing Plate, Front Panel In Mdp Or Mdf, Covered On Both Sides In Low Pressure Melamine Laminate (Bp), Mounted On A Tubular Steel Structure. - Stackable Chair, With Seat And Back In Injected Polypropylene Or Plywood Anatomically Molded, Mounted On A Tubular Steel Structure., 01/27/2026 - 15:16:10