Bids Are Invited For Metal Plank Type Body For Transporting Machinery, With Minimum Capacity Of 25 Tonnes, Width Of 3,000 Mm And Total Length Of 7,850 Mm.

Metal Plank Body For Machine Transport, With A Minimum Capacity Of 25 Tons, A Width Of 3,000 Mm And A Total Length Of 7,850 M. 85 Meters (6.65 Meters + 1.20 Meters Of Inclined Descent), Made With 6” Laminated I-Beam Or U-Beam Stringers Floor In The Flat Part With Wooden Covering 50 Mm Thick, Hardwood (Cambará). “Side Finish In 6” Laminated U Beam On The 1St Soul. Rear Part Recessed Ramp Of 1.20 Meters Long To Raise Machines, Covered With 5 Mm Sheet And Reinforced With ¼ X 2” Corners. Truck.Hydraulic Rear Ramp 2400 Mm Long By 900 Mm Wide Manufactured With Two 6 Thick U Beams And A 6 Central I Beam With ¼ X 2 Angles. (02) Hydraulic Support Shoes With ɸ63mm Rod And 524Mm Stroke Installed At The Rear For Loading Machines. Equipped With A Hydraulic System With Coupled Gear Pump 60 Liter Working Pressure, Driven Through Pneumatic Power Take-Off Installed In The Gearbox Of The Tractor Truck. Hydraulic System With 5 (Five) Independent Levers For Activating All Equipment, Hydraulic Hoses With Pressed Ends, Hydraulic Oil Reservoir And Proportional High Pressure Hoses For Correct Operation Of All...