Bids Are Invited For Hiring A Company To Purchase Equipment And Furniture For Teaching Units.

Lot 1 - Steel Cabinet 2 Doors / 4 Shelves - Steel Cabinet 2 Doors / 4 Shelvesvertical Steel Cabinet, With Two Opening Doors. Structure Made Of Cold-Rolled Steel Sheet No. 26 With Omega-Type Structural Reinforcements. Two-Door Doors Made Of Sheet Metal No. 26 With Vertical And Horizontal Reinforcements. Omega. Built-In Handle Formed By An External Fold Along The Entire Height. Ventilation System Through Perforated Venetian Blinds. Chrome-Plated Yale Type Lock, With Internal Locking By Steel Plate Attached To The Shelf. Fixing Doors By Internal Hinges Or Top/Bottom Pins. Shelves Four Adjustable Shelves, With Omega Type Bottom Reinforcement. Adjustment System Using Perforated Rack With Fitting. Base Shoes In High Impact Polypropylene, With Level Regulators For Irregular Floors And Protection Against Humidity. Glossy Electrostatic Powder Paint Finish, Polymerized In A High Temperature Oven. Previous Chemical Treatment With Degreasing And Phosphating. Minimum Dimensions 900Mm (L) Made From High-Quality Steel With Anti-Rust Treatment, It Contains 5 Double-Fold Shelves Made Of Sheet Metal 22 With Double Reinforcement. Steel Shelves With 5 Trays (2 Omega Reinforcements), Resistant To 100 Kg Distributed Per Shelf And 04 Columns Made Of Sheet Metal 16, Allowing Height Adjustment Of The Shelves As Needed. The Finish In An Electrostatic Powder Painting System (Epoxy) At High Temperature Guarantees Greater Durability Of The Product And Resistance To Time And Rust, Including A Kit With 48 Screws And 48 Nuts., Lot 2 - Rectangular Meeting Table - It Must Have A Top In Medium Density Wood Particle Board Of 25 Mm Thick. Coated On Both Sides With Thermo-Pressed Melamine Film With A Thickness Of 0.2 Mm, Textured, Semi-Matte And Anti-Reflective. Edges With Polystyrene Tape Profile, 2.5Mm Thick, Edge Radius Of At Least 2.5Mm Around The Entire Contour. The Top Must Have A Centralized Socket Box With A Hinged Lid And A Bed With Cutouts For Installing Electrical Sockets And Network And Telephone Connectors. The Structure Must Be Fixed Using Metal Plugs And Screws. The Top/Structure Fixation Must Be Carried Out Using Hidden Minifix Type Screws, Fixed Using Metal Bushings Made From A Resistant Metal Alloy Embedded In The Bottom Face Of The Top. Double Panel (Skirt) Must Be Supplied In Medium Density Wooden Particle Board Of 15 Mm Thickness And 280 Mm Height, Minimum, Under The Top. Coated On Both Sides With Thermo-Pressed Melamine Film With A Thickness Of 0, Semi-Matte And Anti-Reflective Edges With Polystyrene Tape Profile Around The Entire Contour. Panel/Structure Fastening Must Be Done Using Hidden Minifix Type Screws. Metallic Side Feet Must Be Supplied In 02 Pieces, Produced With Tubes And Sheets, Joined Using The Mig Welding Process. Upper Base For Fixing To The Top In Steel Tube 30 X 20 X 0.9 Mm Minimum Thickness. Double And Parallel Column Forming A Duct For The Passage Of Wiring Made Of Tubes Or Sheets Of Minimum Thickness 0.9 Mm, External Rail Removable By Fitting, With Arched Or Perforated Face, And Fixed Smooth Internal Channel, Both Made Of Steel Sheet Of 0.6 Mm Minimum Thickness. Lower Base (Paw) Made Of 1.2 Mm Steel Sheet