Bids Are Invited For Waiver Of Bidding, For The Acquisition Of Seats For The Auditorium, Permanent Material, According To The Specifications Contained In This Terms Of Reference, Destined For The Municipal Department Of The Environment – Sema Of The Municipality Of Paiçandu/Pr.
Bids Are Invited For Waiver Of Bidding, For The Acquisition Of Seats For The Auditorium, Permanent Material, According To The Specifications Contained In This Terms Of Reference, Destined For The Municipal Department Of The Environment – Sema Of The Municipality Of Paiçandu/Pr.
Armchair, Suprema Folding President Model (Wood And Mdf Finish) - Armchair, Suprema Folding President Model (Wood And Mdf Finish) - Backrest: Standardized With The Letters To Be Sent By The Secretariat, Cover Made Of Multi Laminated Resin Plywood, Anatomically Hot Molded, With 11Mm Average Thickness, With Anatomical Curvature; Back Cover (Back) Made From 15Mm Medium-Thick Mdf, With Anatomical Curvature, Varnish Finish On The Mdf Side. Laminated Foam In High-Resistance Microcellular Flexible Polyurethane, Cfc-Free, With Controlled Density D28 With 40Mm Average Thickness. Backrest Covering In Synthetic Vinyl Laminate. Composition: Pvc Coating Applied Over Fabric Reinforcement, Fixed To The Wood Using Clamps With A Zinc-Plated Finish. Note: Check Available Colors For The Coating In The Color Catalog. Seat: Made From Resin-Coated Multi-Alminated Plywood, Anatomically Hot-Molded With An Average Thickness Of 14Mm, With Curvature On The Front. Foam Anatomically Injected In High-Resistance Microcellular Flexible Polyurethane, With Controlled Density From 25 To 55Kg/Mª With 50Mm Average Thickness. Seat Covering In Synthetic Vinyl Laminate, Composition: Pvc Coating Applied Over Fabric Reinforcement, Fixed To The Wood By Clamps With A Zinc-Plated Finish; Seat Back Cover Covered In Corino Koriplas Plus, Textured In Black, Side Finish In Pvc Profile. Fixing: The Seat And Back Are Fixed To The Structure, With Hexagonal Screws, 1/4X20 And Claw Nuts Embedded In The Wood. Structure: The Leg Structure Made From 50X30x1.2Mm Tube, With Leveling Shoes, Stringer Body Structure, Made From Double Bus Bars From 50X30x1 Tube, With Folding Mechanism For Folding The Seat. Arms Produced In 30X1 6X1 Oblong Tube, Without Board, Interspersed With The Stringer Body, With Armrests In Solid Wood, Varnished,
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
