Quotation are invited for D-Station: PH1 Unit 5 Steam Tubrine Bypass to Condenser Control & Isolation Valve Servicing. D-STATION PHASE 1 STEAM TURBINE BYPASS TO CONDENSER CONTROL ANDISOLATION VALVE SERVICING.DESCRIPTION OF WORK:1.#OVERHAUL OF ST BYPAS S TO CONDENSER CONTROL VALVE QUANTITY: 1 MAKE:COPES-VULCAN, MODEL 0-100-400 (B)2.#OVERHAUL OF ST BYPASS TO CONDENSER ISOLATION VALVE QUANTITY: 1SCOPE OF WORK: -1. MOBILIZATION OF PEOPLE, MATERIAL, TOOLS AND CONSUMABLES2. RISK ASSESSMENT AND WORK METHOD STATEMENT T O BE SUBMITTED.3. TOOLBOX TALK TO BE GIVEN TO THE CONTRACTOR PEOPLE ON DAILY BASIS.4. COMPLETE DISMANTLEMENT AND REASSEMBLY OF THE V ALVE, AND ANY OTHERPARTS REQUIRED WILL BE IN THE VENDOR#S SCOPE OF WORK.5. INSPECTION OF EVERY PART OF THE VALVE6. INSPECTION WITH N DT7. SUPPLY OF SPARES SUCH AS O RINGS, GASKETS, PACKING, LOCK RINGS, ANDREPAIR WORK SUCH AS MACHINING ARE IN THE VENDOR#S SCOPE OF W ORK8. REASSEMBLY OF THE VALVE, AND ANY OTHER PARTS DISMANTLED IS IN THEVENDOR#S SCOPE OF WORK9. LEAK AND FUNCTIONAL TEST OF THE VALV E.10. LIFTING SHALL BE CARRIED OUT BY THE VENDOR. ALL REQUIRED TOOLS FORLIFTING SHOULD BE BROUGHT BY THE VENDOR. IN ADDITION TO THAT , ALLLIFTING TOOLS SHOULD HAVE VALID CERTIFICATES.11. TRANSPORTATION OF THE PARTS FROM THE POWER PLANT SHALL BE CARRIEDOUT BY THE VE NDOR12. SUBMISSION OF REPORT OF WORK DONE13. PARTS TO BE PAINTED WITH THE SAME COLOR.14. WORK WILL BE CARRIED OUT AS PER DEWA WORK S CHEDULE.15. DEWA HEALTH, SAFETY AND ENVIRONMENT POLICY WILL BE FOLLOWED16. WORK TO BE COMPLETED IN ALL RESPECTSSCOPE OF DEWA:1. ALL I&C AND ELECTRICAL INSTRUMENTS SHALL BE DISCONNECTED BY DEWA2. AIR SUPPLY AVAILABLE AT ONE POINT3. POWER SUPPLY IN ONE POINT4. CRANE AS AVAILABLE5. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO HAVE HIS OWNARRANGEMENT IN EXTENDING THE ELECTRICITY AND WATER UTILITY TO HIS PLACESOF WORK. FOR ANY BULK STORAGE OF WATER, CONTRACTOR SHOULD MAKE HIS OWNARRANGEMENT FOR STORAGE TANKS, ETC.6. THE CONTRA CTOR, HOWEVER, IS REQUIRED TO FURNISH IN ADVANCE HISREQUIREMENT OF POWER AND AIR WITH FULL JUSTIFICATION. CONTRACTOR SHALLNOT WASTE OR MISUSE THE FACILITIES PROVIDED BY DEWA.7. ISOLATIONS AND PERMIT TO WORK OF THE DESIGNATED EQUIPMENT IN LINEWITH DEWA PTW PROCEDUR E.8. NECESSARY ENTRY PERMITS FOR CONTRACTOR PERSONNEL, EQUIPMENT ANDVEHICLES AS PER DEWA PROCEDURE.9. VENDOR HAS TO FOLLOW ALL DEWA STIPULATED COVID GUIDELINES WHICH MAYSUPERSEDE DHA COVID GUIDELINES.WARRANTY:1. THE WARRANTY PERIOD FOR THE WORKS SHALL BE ONE YEAR FROM THE DATE OFCOMMISSIONING2. IN CASE OF ANY DAMAGE/DEFECT OF THE WORK CARRIED OUT UNDER THISCONTRACT WITHIN THIS WARRANTY PERIOD, THE CONTRACTOR SHALL ATTEND ANDCARRY OUT THE NECESSARY REPAIR / REPLACEMENT WORK AND MAKE GOOD THEDEFECT WITHIN SHORTEST PERIOD. TH E CONTRACTOR WILL PROVIDE 24-HOUREMERGENCY NUMBER AND WILL ENDEAVOR TO BE ONSITE WITHIN 24 HOURS OFRETURN REQUEST BY DEWA.3. ON BEIN G GIVEN A NOTICE OF DEFECT BY DEWA, THE CONTRACTOR SHALLARRANGE TO CARRY OUT THE REPAIR WORK WITHIN THE PRESCRIBED TIME LIMIT ASSET OUT BY DEWA AND ALL SUCH CONTINGENCIES SHALL BE DEEMED TO HAVE BEENCOVERED IN THE OFFER.PAYMENT:PAYMENT WILL BE DONE AS PER ACTUAL WORK Qty: 1 D-Station: PH1 Unit 5 Steam Tubrine Bypass to Condenser Control & Isolation Valve Servicing Contact
[email protected] Tel: 507254949 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332600160)/$value
