Quotation Are Invited For Supply And Deliver Rigid Hull Vessel

Quotation are invited for Supply and Deliver Rigid Hull Vessel Delivery Date: 2026/02/27 Delivery To: Ronewa Ramalisa Fleet Management Delivery Address: 23 23 Oude Molen Road , Ndabeni, Cape Town Closing Date: 2026/01/30 Closing Time: 02:30 PM Description: Supply and deliver rigid hull vessel Specification: * Supply and Delivery of Rigid Hull Vessel 1. Scope of Supply The bidder shall supply and deliver a fully built Rigid Hull Vessel, complete with propulsion system, trailer, accessories, safety equipment, documentation, and all fittings required for safe day-to-day operational use. 2. Vessel Type Rigid monohull, centre-console design, suitable for coastal and inshore operations. Optimised for stability, speed, and multi-purpose loading. 3. Construction & Materials Hull Type: Deep-V or semi-V rigid hull Material: GRP composite Deck: Self-draining, non-skid finish, gel coated for extra durability Hand railing installed at bow Engines must be protected by a suitable, approved protective cover bar. This must be approved marine grade of stainless steel or high tensile steel, hot dipped galvanised and must accommodate two 140HP twin installation. The motor consul panel must include fuel, temperature and oil gauges, and a marine grade 12v electrical outlet. The consul colour scheme must be a standard white or blue or grey to clients choice. The vessels must have marine tow connections; vessel will require secure attachment points on port and starboard side at the stern to attach a towing bridle. Freeboard requirement Night lights suitable for night rating + low-level deck lighting. Fuel pump in proper housing 4. Dimensions (Typical Range) Parameter: Typical Range Length Overall (LOA): 69 m Beam: 2.23.0 m Draft (Loaded): 0.350.65 m Hull Weight (Dry): 8001800 kg Full Displacement: 12002500 kg Deadrise: 12° 24° Transom Height (cm): 5089 cm Transom Length: 0.63 m 5. Propulsion System Configuration: twin outboard engines Fuel Type: ULP Petrol or Marine Diesel (depending on engine spec) Total Power Range: 115150 HP (smaller vessels) Fuel Tank Capacity: 200400L 6. Performance (Estimated) Maximum Speed: 2545 knots (depending on engines & load) Cruising Speed: 1830 knots Operational Range: 60200 nautical miles 7. Control & Navigation Steering: Hydraulic or mechanical Helm: Centre console with windshield Standard Electronics: - GPS / Chart plotter - VHF Radio - Depth Sounder - Navigation & all-round anchor lights Vessel must show track record of sea trials and safety Operating manual + all compliance documentation supplied with vessel 8. Capacity & Layout Minimum seating capacity: 6 persons Forward deck storage 9. Safety & Compliance Buoyancy: Built-in foam / compartmentalised chambers Standards: Vessel must conform to SAMSA safety requirements for small vessels/ ISO Small Vessel Code Fire extinguisher holders & safety gear storage Non-slip deck, handrails, and grab points Lockable storage bins with suitable marine grade locks must be included. Night lights / low deck lights 10. Electrical System 12V marine-grade power distribution Dual battery bank with isolator switches Bilge pumps, breakers, and fuse panel Deck and navigation lighting (LED) 11. colour The colours shall conform City of Cape Town colours 12. Trailer Requirement The trailer shall have its first registration and license with respect to the National Road Traffic Act (Act 93 of 1996) (as Amended) in the name of the City of Cape Town. Trailer must have flushable hubs and sealed bearings Boat + trailer combined weight: 13933500 kg Trailer must be "suitable" for vessel 13. Warranty The contractor shall provide the following warranties: - Five-year limited warranty for the hull structure excluding fair wear and tear and abuse. - 12 months for all electronics and other general items excluding abuse and/or fair wear and tear. - 12 months against manufacturing defects and poor workmanship. - The warranty provision shall exclude user accidents, mishandling, abuse and/or fair - wear and tear. ENTITY REQUIREMENTS Confirmation from an Authorised Distributor/OEM Reseller Letter that the tendering entity can supply the goods tendered for. The Authorised Distributor/OEM Reseller letter shall be on the signed Distributor/Manufacturers letter head. Contact Person: Ronewa Ramelisa Email Address:Fleet.Tenders.Capetown.gov.za Contact Number: 021 400 1329 Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/316365