Tenders Are Invited For Delivery And Installation Of Solar Lamps In The Radziejów Commune

1. The Subject Of The Order Is The Delivery Of A Pole, Foundation And Installation Of 33 Solar Lamps. The Lamps Will Be Installed In Individual Towns In The Commune. Radziejów. The Installation Location Will Be Indicated After Signing The Contract.2. Detailed Description Of The Subject Of The Order - Minimum Parameters Of The Lamp1) Bifacial Solar Panel With A Power Of ≥120W, A Total Of Min. 240W/18V, Material – Monocrystalline Cells, Pv Panel Holder/Frame – Galvanized Steel. A Holder That Allows It To Be Directed Towards The South And At An Appropriate Angle In Relation To The Ground.2) Lithium-Iron-Phosphate Battery With A Capacity >200 Ah, Location - Built In The Lamp Housing, Number Of Charging Cycles ≥ 1,800.3) Lamp Head (Housing) - Luminous Flux ≥8,700 Lm, Light Power ≥ 50W, Led Efficiency ≥175 Lm / W, Lighting Time (Fully Charged) ≥3 Nights, Installation Height ≥5.5 M.4) Elements Of The Solar Lamp: A) Steel Boom, Galvanized, Unpainted, Minimum 1 M, Must Allow For Internal (Inside The Boom) Passage Of The Cable Connecting The Fixture With The Pv Panel. The Booms Or Mounting Brackets Of The Fixtures Must Guarantee The Possibility Of Directing The Light Beam At An Angle Of 10º To 20º In Order To Properly Illuminate The Area. The Boom Should Be A Separate Element Of The Lighting Fixture. B) A Steel Pole, Conical, Galvanized, Unpainted, Without An Inspection Recess, With A Height Of More Than 6 M. Installation Of Solar Lighting Fixtures With A Solar Panel. D) Control – Min. 4 Luminaire Operating Modes. Possibility Of Programming Individual Operating Modes In Accordance With The Season And Customer Needs: - Lighting Time And Power At Specific Hours After Dusk, Night Break - Delay In Switching On After Sunset - Motion Sensor Allowing For Increasing Light Intensity In The Event Of Motion Detection - Delay In Switching On After Sunset - Motion Sensor Allowing For Increasing Light Intensity In Case Of Motion Detection) Marking Of The Year Of Production Of The Luminaire By The Manufacturer On Its Casing. The Ordering Party Requires That The Lamps Have A Ce Certificate, Which Confirms Compliance With European Standards. Safety, Health And Environmental Standards.3. The Contractor Is Obliged To Execute The Order On The Terms And Conditions Described In The Draft Provisions Of The Contract Constituting Annex No. 4 To The Swz.