Bids Are Invited For Hiring A Specialized Company For The Construction Of Ubs Size I, New Headquarters Of Ubs Carlos Chagas, Proposal Transferegov 360000197032025 From The Ministry Of Health, To The Municipal Health Secretariat Of Lassancemg.

1.1.1 Lease Of Container Type Deposit - Minimum Area Of 13, 80 M2, 1.1.2Open Shed To Support Production Carpentry, Armature Center, Workshop, Etc. C Scissors, 4Mm Tile, Bleached Concrete Floor, 1.1.3Lease Of Container - Bathroom With Showers And Vases - 4, 30 Af032024, 01/23/2026 - 08:05:25, 01/23/2026 - 08:05:26, 1.1.6Hydrometer Dn 12, 1, 5 M3h - Supply And Installation. Af032024, 1.1.7Electrical Power Input, Overhead, Three-Phase, With Embedded Box, 10 Mm2 Cable And Din 50A Circuit Breaker Not Included The Concrete Post. Af072020, 1.1.8 Supply And Installation Of Workplate With Galvanized Sheet And Wooden Structure. Af032022ps, 1.2.1 Junior Construction Civil Engineer With Additional Charges, 1.3.1 Mobilization And Demobilization Of Site, 1.4.1 Rental Of Metal Scaffolding Type Facade, Pieces Approximately 1.20 M Wide And, 2.1 Conventional Rental Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af032024, 2.2 Mechanized Trench Excavation With Prof. Up To 1.5 M Average Upstream And Downstream Composition Per Section, Backexcavation. 0.26 M3, Width. From 0.8 M To 1.5 M, On 1St Category Soil, In Locations With A High Level Of Interference. Af092024, 2.3 Manual Trench Excavation. Af092024, 2.4 Ballast With Granular Material Crushed Stone N.1 And Crushed Stone N.2, Applied On Floors Or Slabs On Ground, Thickness Of 010 Cm0. Af012024, 2.5 Manufacture, Assembly And Disassembly Of Formwork For Crowning Block, In Sawn Wood, E25 Mm, 4 Uses. Af012024, 2.6 Block Frame Using 5Mm Ca-60 Steel - Assembly. Af012024, 2.7 Block Frame Using 6.3Mm Ca-50 Steel - Assembly. Af012024, 2.8 Block Frame Using 8Mm Ca-50 Steel - Assembly. Af012024, 2.9 Block Frame Using 10Mm Ca-50 Steel - Assembly. Af012024, 2.10 Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af012024, 2.11 Block Frame, Baldrame Beam And Running Shoe Using 16 Mm Ca-50 Steel - Assembly. Af012024, 2.12 Concreting Of Crowning Block Or Baldrame Beam, Fck 30 Mpa, Using A Pump - Laying, Thinning And Finishing. Af012024, 2.13 Spreading Material With Crawler Tractor. Af092024, 2.14 Manual Trench Backfilling, With Percussion Soil Compactor. Af082023, 2.15 Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af092023, 2.16 Technological Control Of Concrete, 3.1.1 Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, Simple Straight Foot, Made Of Resin Plywood Sheet, 6 Uses. Af092020, 3.1.2 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af062022, 3.1.3 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Af062022, 3.1.4 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 16 Ca-50 Steel, 3.1.5 Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 5 Steel, 3.1.6 Concreting Of Pillars, Densification And Finishing. Af022022ps, 3.1.7 Technological Control Of Concretes, 3.2.1 Assembly And Disassembly Of Beam Formwork, Shoring With Ga