Bids Are Invited For The Purpose Of This Bidding Procedure Is To Record Prices With The Purpose Of Selecting The Most Advantageous Proposal For Future And Eventual Acquisition(S) Of Metallic Reservoir(S) For Storing Water Resources, With A Minimum Capacity Of 200,000 Liters (200M³), Including Installation, To Be Supplied And Installed In Installments, In Accordance With The Minimum Specifications Contained In The Notice, Term Of Reference And Other Annexes.
Bids Are Invited For The Purpose Of This Bidding Procedure Is To Record Prices With The Purpose Of Selecting The Most Advantageous Proposal For Future And Eventual Acquisition(S) Of Metallic Reservoir(S) For Storing Water Resources, With A Minimum Capacity Of 200,000 Liters (200M³), Including Installation, To Be Supplied And Installed In Installments, In Accordance With The Minimum Specifications Contained In The Notice, Term Of Reference And Other Annexes.
Acquisition And Installation Of A Metallic Reservoir For Water Resources, With A Minimum Capacity (Volume) Of 200,000 Liters/200M³, In A Cylindrical Shape With A Conical Roof, Containing The Following Dimensions: A Maximum Of 3.86 Meters In Diameter And A Maximum Height Of 17.8 Meters (Useful Height Of The Reservoir), Added To A Protective Grid With A Minimum Height Of 1.20 Meters Installed Around The Entire Perimeter. Manufactured With High-Resistance Astm A36 Steel Sheets, Welded Using The Mig Process, Using Copper Wires Or Using The Smaw Process, With Manual Electric Arc Welding With A Coated Electrode. Total Internal Painting Of 100 Micrometers, With Shop Epoxy And Polyamide. Total External Painting Of 100 Micrometers, With Industrial Dual Function Enamel. Accompanied By An External Marine Ladder Attached Throughout The Structure. With Railing And Resting Landing. Internal Staircase. At Least Eight Fixing Feet Matching The Structure. With Inspection Mouth On The Ceiling And Light Breather Of Approximately 4 (Four Inches). With The Following Connections: 1 (One) Upper Inlet, 1 (One) Upper Overflow, 1 (One) Lower Drain And 1 (One) Lower Outlet, All Measuring Between 1.5 And 2.5 (One And A Half Inches To Two And A Half Inches) In Diameter. With A Note Of Technical Responsibility And Provision Of A Paint Potability Report Provided By Its Manufacturer.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
