Bids Are Invited For Acquisition Of Equipment For An Outdoor Gym, Made Entirely Of Aisi 304 Stainless Steel, With Tig Welding, A Passivated And Polished Finish, To Be Fixed On A Base Previously Concreted By The Administration, Using An Anti-Theft System. The Contract Aims To Meet The Guidelines Of Parliamentary Amendment No. 1744/2024, In Accordance With The Conditions, Quantities And Requirements Established In The Notice And Its Annexes.
Bids Are Invited For Acquisition Of Equipment For An Outdoor Gym, Made Entirely Of Aisi 304 Stainless Steel, With Tig Welding, A Passivated And Polished Finish, To Be Fixed On A Base Previously Concreted By The Administration, Using An Anti-Theft System. The Contract Aims To Meet The Guidelines Of Parliamentary Amendment No. 1744/2024, In Accordance With The Conditions, Quantities And Requirements Established In The Notice And Its Annexes.
Lot 1 - Diagonal Rotation In Stainless Steel: Manufactured With 304 Stainless Steel Tubes With A Diameter Of 1 X 3.05 Mm; 1.1/2 X 3.05Mm; 3.1/2” Shafts And Bearings In Stainless Steel. Handling Ball In Rubber Or Bakelite. Device Assembled Using The Tig Welding Process, With Polished Finish, Shafts And Bearings In Stainless Steel. Responsible And Attested Ergonomically And Biomechanically By A Physiotherapist And Ergonomist Duly Accredited To Crefito Following Norm Nbr 16.779., Lot 1 - Walking Simulator In Stainless Steel: Manufactured In Polished 304 Stainless Steel With A Circular Section Of 3. 1/2 X 3.05 Mm, 1.1/2 X 3.05 Mm. Footpegs Made Of 304 Stainless Steel Plate, Stamped With A Non-Slip Finish, With A Thickness Of 2.0 Mm. Equipment Durability. Fixing To The Ground Using Stainless Steel Anchors With Anti-Theft System, Lot 1 - Individual Mechanical Elliptical In Stainless Steel: Equipment Manufactured With 304 Stainless Steel Tubes With A Circular Section Of 2.1/2” 1000 Mm Width 350 Mm Height 1500Mm. Bushings In Schedulle 80 Drawn Stainless Steel Tube. Pedals In 304 Stainless Steel Sheet With Non-Slip Finish, 2.0 Mm Thick, Solid Axles And Stainless Steel Bearings. Device With Polished Finish, Screws And Nuts With Zinc Finish, Shafts And Bearings In Stainless Steel. Handle And Footrest With Non-Slip Finish Without Plastic, Rubber Or Similar Components, Increasing The Durability Of The Equipment. Fixing To The Ground Using Stainless Steel Anchors With Anti-Theft System, Lot 1 - Individual Bicycle Seat In Stainless Steel: Device Manufactured With 304 Stainless Steel Tubes With Ø 2.1/2” Ø 1” Stainless Steel Anchors With Anti-Theft System, Lot 1 - Double Leg Press In Stainless Steel: Manufactured With 304 Stainless Steel Tubes With A Circular Section Of 2 X 3.05 Mm; Square Fixing Plate With 240 Mm X 240 Mm X 5.0Mm. Seats In 2.0 Mm Thick Stainless Steel Sheet Printed With An Anatomical Shape. Bushings In Schedulle 80 Drawn Stainless Steel Tube. Solid Pins, Bearings With Double Bearings. Device With Polished Finish, Zinc-Plated Screws And Nuts. This Equipment Has A Rubber Stopper. Footrest With Non-Slip Rubberized Finish. Fixing To The Ground Using Stainless Steel Anchors With Anti-Theft System, 01/23/2026 - 14:10:16, Lot 1 - Side Board (Surf) In Stainless Steel: Equipment Manufactured With 304 Stainless Steel Tubes Of Ø 3.1/2, 3.05 Mm 1.1/2, Fixing Plates In A
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
