Quotation are invited for Cover;2a;Polym;Ø610;80 Delivery Date: 2026/03/24 Delivery To: Logistics - Ndabeni Store MATERIALS STORE / PH: 444 5456 Delivery Address: 25 Oude Molen Road, Ndabeni Closing Date: 2026/01/26 Closing Time: 04:00 PM Description: 24 each x cover;2a;polym;ø610;80 Specification: * MANHOLE COVER - TYPE: SABS Type 2A; MATERIAL: Polymer; COVER DIMENSIONS: Ø610mm; SEATING DIMENSION: 80mm; DIMENSION TOLERANCES: Cover dimension tolerance of +0mm /-2mm. Seating dimension tolerance of ±2mm. Frame dimension tolerance and nominal daylight opening dimension tolerance of ±5mm; COMPATIBILITY: To be compatible for replacement in a SABS type 2A frame. In all instances where covers are to be compatible with frames, the fitment shall be flush and not create a step with the surface of installation of frame; CLASS DUTY: Heavy duty; FORCE: 135kN; SHAPE: Circular; MATERIAL COMPOSITION: The resin shall be a resin specifically made for casting which conforms to the requirments as defined in SANS 713 - Unsaturated polyester (UP) resin systems; SPECIFICATIONS: Solid top. New City specification; BRANDING: Casting to be branded with the "CITY OF CAPE TOWN", "STORMWATER", "H" for heavy duty class, "SABS" mark and manufacturer name; STANDARDS: The manhole cover shall comply with SANS 1882. Product markings as per SANS 1882. Certificate of conformance to SABS standards to accompany every delivery. Proof of conformance and test reports to be supplied on request; GUIDELINE: Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". IMPORTANT: QUOTATION CONDITIONS: The quotation condition listed below are in addition to those contained in the CCT standard quotation conditions and must be fully complied with: Clause 3: General Obligations 3.6.1.1 For this quotation, purchase orders / works packages will be determined and created as follows: 3.6.1.1.1 Based on the total amount as reflected on the Price Schedule and to the supplier as awarded by the SCM delegated authority. CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned will be declared non-responsive. The Municipal Bidding Document 6.1 is attached, to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with every RFQ submission, failure to submit will result in zero-point allocation. Please note that the MBD6.1 document is valid a year from date of signature. Failure to comply with the above will result in a zero (0) allocation for preference points. INSURANCE DOCUMENTS: Ensure that all required insurances such as your Public liability, Employers liability or COIDA and motor vehicle insurance are attached and that they are up to date. Tender Link : https://web1.capetown.gov.za/web1/procurementportal/RFQ/Details/316238
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
