Executive High Cabinet. Dimensions:800X500x1600mm: Tall Semi-Open Cabinet (Executive), With 04 Shelves, 03 Of Which Are Furniture And 01 Are Fixed. Dimensions: 800 (Width) X 500 (Depth) X 1600 (Height). Top Top Made With Medium Density Wood Particleboard (Mdp – Medium Density Particleboard), 25Mm Thick, Covered On Both Sides With Melamine Laminate, Through The Effect Of Hot Pressing Which Makes The Laminate Fuse With The Agglomerated Wood, Forming With It A Single And Inseparable Body (Bp), Originating From Wood Reforestation Certified With Fsc Seal, With 2Mm Ps Tape All Around, Glued To The Top Through “Hot Melt” Process, With Impact Resistance And Thermally Stable. (Wide Competition), Low Cabinet Closed Desk. Dimensions: 800X500x740mm: Closed Base Cabinet, With 01 Mobile Shelf. Dimensions: 800 (Width) X 500 (Depth) X 740 (Height). Top Top Made With Medium Density Wood Particleboard (Mdp – Medium Density Particleboard), Using Hot Pressing Effect That Makes The Laminate Fuse The Agglomerated Wood, With Impact Resistance And Thermally Stable. (Wide Competition), Closed Closet Director. Dimensions: 800X500x1600mm: Tall Closed Cabinet With 04 Shelves, Low Bookcase – 2 Shelves Small Bookcase - Body Composed Of Side Pieces, Bottom, Shelf And Dividers In Particleboard Wood (Mdp), 18Mm Thick, Coated On Both Faces With Low Pressure Melamine Laminate. Rear Piece In Particleboard Wood (Mdp), 15Mm Thick, Coated On Both Sides. Top In Particleboard Wood (Mdp), 18Mm Thick. Edges Topped With Pvc Edge Tape (Polyvinyl Chloride) With “Primer”, Textured Finish In Gray And Red Colors, Glued With “Hot Melting” Adhesive. Base In Carbon Steel Tube, Cold Rolled, With Seam, Rectangular Section Of 20 Mm X 40 Mm, In Sheet 14 (1.9 Mm), In Gray Color. Metal Leveling Shoes, With Injected Polypropylene Base, 3/8 Thread. Finishing On Metallic Parts Must Be Applied Anti-Ferruginous Treatment That Ensures Resistance To Corrosion In A Salt Spray Chamber For At Least 300 Hours In The Painting Process. Welding Spatter And Irregularities, Burrs And Sharp Corners Are Rounded Off. The Edge Tape Must Be Applied Exclusively Through The “Hot Melting” Gluing Process, And Must Receive A Milled Finish After Gluing, Configuring Rounded Edges With A Radius Of 1Mm. Full Four-Month Warranty Against Manufacturing Defects And Oxidation. Note: The Date For Calculating The Warranty Must Be Based On The Invoice Of Shrink-Wrapped Plastic Packaging, Corrugated Cardboard, And Expanded Polyethylene Blanket Or Bubble Wrap Sheets, Of Appropriate Weight To The Characteristics Of The Product, In Order To Protect Against Damage During Transportation And Handling; Fixing Using Adhesive Tape, Which Should Not Be In Direct Contact With The Product. Dimensions, Linear Service Counter Straight Service Counter With Mezzanine (1, 80X0, 75) Top: Made Of Medium Density Mdp Bp Wood Sheets 25 Mm (Medium Density Particleboard). They Are Bonded And Compacted With Synthetic Resin Using Pressure And Heat, Coated With A Paper Sheet Impregnated With Melamine Resins On Both Sides. It Stands Out Due To The Characteristic Of Its Uniform, Thin, Smooth And High-Density Surface, Ensured By Perfect Distribution
