Bids Are Invited For Hiring Of A Specialized Company To Carry Out The Construction Of The Casa Do Autista, Through Agreement No. 9420076 – Special Transfer – Indication No. 144482 And Through Agreement No. 9467952 – Special Transfer – Indication No. 166897 Including Labor And Materials, Which Aims To Meet The Necessary Demand Of The Municipality Of Perdizes, In Accordance With The Minimum Specifications Indicated In This Basic Project

Construction Shed For Storage And Tooling Type-I, Internal Area 14, 52M2, Made Of Resin Plywood Sheet, Including Furniture (Small Work, Effective Up To 30 Men), Der-Mg Standard, Lease Of Chemical Bathroom, Size (110X120x230)Cm, Standard Line, Containing One (1) Sink/Sanitizer Hands, Including Maintenance And Mobilization/Demobilization, Supply And Placement Of Work Sign In Galvanized Sheet 26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1.25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats, Work Rental With Template Of Boards Punched Every 2.00M, Reuse (2X), Including Monitoring Of Topographic Team To Mark Topographic Point, Topographic Location For Up To Twenty (20) Reference Points, Including Stake (Picket) Marking, 01/21/2026 - 13:09:43, 01/21/2026 - 13:09:55, Manual Drilling Of Auger Type Pile, Including Spacing, Excluding Frame, Structural Concrete, Transport And Removal Of Excavated Material, Shaping And Unshaping Of Board And Batten, Reuse (3X) (Foundation), Supply Of Structural Concrete, Prepared On Site With A Concrete Mixer, With Fck 20 Mpa, Including Placing, Densifying And Finishing (Foundation), Cutting, Bending And Assembly Of Ca-50 Steel Diameter (6.3Mm To 12.5Mm), Bending And Assembly Of Ca-60 Steel Diameter (4.2Mm To 5. 0Mm), Waterproofing Paint With Polymeric Mortar, Formwork And Stripping Of Boards And Battens, Reuse (3X), Exclusive Shoring, Unidirectional Pre-Molded Slab With Expanded Polystyrene Filling (Eps), 4Cm Capping, 100Kg/M2 Overload, Total Height Of 11Cm And Free Space Maximum 5M, Including Structural Concrete, Machined Pumped With Fck Of 20Mpa, Exclusive Reinforced Mesh And Cramping, Ca-60 Steel Mesh Reinforcement, Welded Type Q-61, Diameter Ø3, 4Mm, Weft With Dimension (150X150)Mm, Including Spacer, Exclusive Concrete, Masonry Of Fence With Perforated Ceramic Brick, Esp. 14Cm, For Cladding, Including Mortar For Laying, Concrete Block Masonry Filled With Frame, In Concrete With Fck 15Mpa, Including Mortar For Laying (Detail D - Seds Notebook), Hollow Element Masonry, Concrete Cobogó (20X40)Cm, Esp. 10Cm, Venetian Type With Apparent Finish, Lintel Or Counter Lintel In Structural Concrete For Spans Above 150Cm, Control A, Molded In Situ, Including Frame, Sheet Metal With Mortar, Mix 1:3 (Cement And Sand), Esp. 5Mm, Applied To Masonry/Concrete Structure With Spoon, Mechanical Preparation, Coating With Mortar In A Single Layer, Applied To Walls, Esp. 20Mm, Manual Application, Plaster Coating On Ceiling, Including Lath Finish, Ceramic Coating Applied To Wall, Enamelled Finish, Internal/External Environment, Extra Standard, Piece Size Up To 2025 Cm2, Pei Iii, Laying With Industrialized Mortar, Including Grouting, Waterproofing Painting With Mortar Polimérica Pisos, Concrete Floor, Fck 10Mpa, Without Reinforcement, Rustic Finish, Esp. 5Cm, Including Supply, Launching, Densification, Lathing, Excluding Expansion Joint, Coating With Porcelain Applied To Floor, Polished Finish, Internal Environment, Rectified Edge, Size Of Piece (60X60) Cm, Skirting Board With Commercial Glazed Ceramic Coating, Height 10Cm, Pei Iv, Concrete Floor Conventional Machined