Circulation Pump 32/8 180 Mm Grs. Circulation Pumps Of The Upc Series - With A “Wet” Rotor Are Designed For Pumping Working Fluids In Heating Systems With A Stable Or Slightly Varying Flow Rate. Scope Of Application: For Pumping Coolant In Heating Systems With Constant Flow Or Slightly Varying Flow. Working Fluids: Clean Water Of Low Hardness, Clean, Low-Viscosity, Non-Aggressive And Non-Explosive Liquids Without Solid Or Fibrous Inclusions, As Well As Impurities Containing Mineral Oils. The Pump Has Three Power Levels, Power Adjustment Is A Mechanical Three-Position Switch. Power Max: 245 W. Pressure Max: 8 M. Capacity Max: 166 L/Min. Maximum Permissible System Pressure: 10 Bar. External Thread: 2. Bore: 1.25. Installation Length: 180 Mm. Material: Cast Iron. Weight 6 Kg. The Permissible Maximum Coolant Temperature Is Up To +110°C. 1St Stage Current Strength, A 0.60. 1St Stage Power, W 135. 2Nd Stage Current Strength, A 0.85 2Nd Stage Power, W 190. 3Rd Stage Current Strength, A 1.0. 3Rd Stage Power, W 245. Type Of Equipment - Surface. Purpose - Heating. Pump Installation Vertical/Horizontal. The Pump Mechanism Is Centrifugal. Electrical Network Parameters 230V, 50Hz. Permissible Maximum Ambient Temperature Up To +40°C. Water Quality Pure Water Of Low Hardness, Clean, Low-Viscosity, Non-Aggressive And Non-Explosive Liquids Without Solid Or Fibrous Inclusions.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
