Quotation are invited for Supply and Delivery Protective Clothing from Date of Appointment till 30 June 2026 Two-piece conti suits Jackets and trousers will be ordered and delivered individual and not as a unit. Tender separate prices in the pricing schedule for jackets and trousers. All conti suits must be fabricated from 100% Cotton Attach Documentary proof of compliance to SABS/SANS standards. Material must comply to SANS manufacturing standards Conti suits must comply to the following SANS standards: Elastic fabrics and strips Sewing threads. Slide fasteners Standard nomenclature of stitches and seams. Sewing stitches per unit length. The tenderer must be able to prove compliance to SANS if requested. 17 The Municipality reserves the right to confirm acceptable compliance to SANS specifications All seams must be triple stitched Bar tacked at stress points TROUSERS Comply Yes / No The following information label must be stitched to all conti suit trousers, including the sample and all delivered items during the contract. The size 100% Cotton / J54 Washing instructions Two inside swinging pockets. Approximately 170mm Width, 150mm Depth One rear hip pocket Ruler pocket. Approximately 80mm wide x 230mm deep Lined waistband Back elasticised from seam to seam Belt loop: Minimum of 5 loops. Loops approximately 50mm wide Triple stitched stress seams. Bar tacked at stress points Slide fastener as specified by SANS, corrosion free plated metal. YKK or similar approved aluminium Zip type 3. Reflective strip: Approximately 50mm wide. Stitched to material around both legs. Stitching of reflective strip must be Incorporated into the triple stich seam and not stitched over. Colour: Lime background with silver centre strip. JACKETS Comply Yes / No The following information label must be stitched to the jacket inside the collar of all conti suit jackets, including the sample and all delivered items during the contract. The size 100% Cotton / J54 Washing Instructions Long sleeves Left hand Breast Pocket with tapered overlapping flap and M/F stud closure. Pocket size: Approximately 140mm wide x 150mm deep LH & RH side pockets on the hips. Pocket size: Approximately 150mm wide by 180mm deep. One-piece sleeves Front closure of jacket: Slide fasteners YKK or similar approved aluminium Zip Type 5 as specified by SANS. Corrosion free plated metal with overlap and concealed M/F studs Plain hemmed cuff, double stitched. Triple stitched stress seams Bar tacked at stress points Plain back without yoke / no stitching on upper back Jacket must be of full length with NO waistband. Reflective strip: Approximately 50mm wide. Stitched to material around both arms. Stitching of reflective strip must be Incorporated into the triple stich seam and not stitched over. Colour: Lime background with silver centre strip. The letters SBM embroided on the back upper part in white/light grey, minimum 50mm wide. The SBM logo embroided on the breast pocket. (Embroidery not needed to be on samples) Actual size of logo Tender Link : https://sbm.gov.za/quotations-above-r30000/
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
