Bids Are Invited For Price Record For Future And Eventual Acquisition Of General And School Furniture, Covering Not Only The Supply Of Items, But Also Delivery, Assembly And Technical Assistance Services, With Full Coverage Against Manufacturing Defects, Including The Supply Of Parts Necessary To Correct Any Nonconformities Identified During The Warranty Period.
Bids Are Invited For Price Record For Future And Eventual Acquisition Of General And School Furniture, Covering Not Only The Supply Of Items, But Also Delivery, Assembly And Technical Assistance Services, With Full Coverage Against Manufacturing Defects, Including The Supply Of Parts Necessary To Correct Any Nonconformities Identified During The Warranty Period.
Lot 1 - School Set - Table And Chair For Student - Size 6. Table The Table Should? Have Dimensions Of 600 X 450 X 760 Mm (Width Does The Table Top Duty? Present In A Rectangular Shape, Made Of Mdp Or Mdf With A Nominal Thickness Of 19 Mm. On The Lower Face, There Must Be A Minimum Of Four Machine Threaded Nuts In Diameters M6 Or M8, Intended For Fixing The Base Structure. The Edges (Tops) Of The Top Must Be Finished In Pvc Or Abs Edge Tape, With A Minimum Thickness Of 2 Mm, Applied Using A Holt-Met Process Or Equivalent, Which Ensures Perfect Adhesion And Resistance To Peeling. Duty? There Will Be Centralized Front Machining For The Installation Of A Pencil Holder, Fixed To The Top By Two Screws, With A Minimum Useful Depth Of 10 Mm. The Lower Face Of The Top Duty? Be Coated With Low Pressure Melamonic Paper (Bp), Providing Protection Against Humidity And Deformation. Does The Upper Face Duty? Be Covered With High Pressure Melamonic Laminate (High Pressure Decorative Laminate - Hpl, Formica Type), With A Minimum Thickness Of 0.7 Mm, Glued Using A Process That Ensures Permanent Adhesion And A Uniform Finish. The Metal Structure Duty? Be Composed Of Double Columns At Each End, Made Of Cold-Rolled Carbon Steel Tube With Seam, With Rectangular Section Of 20 X 40 Mm And Thickness Of 1.5 Mm. It Will Be Manufactured In An Oblong Tube Of 29 The Duty Structure? Receive Electrostatic Painting In Gray Color And Injected Plastic Tips In Blue Color. The Feet Must Be Made Of Cold-Rolled Carbon Steel Tube With Stitching, With A Circular Section Of 38 Mm (1?) And A Thickness Of 1.5 Mm. The Leveling Shoes And Tips Must Be Injected Into Powder, Lot 1 - School Set - Student Table And Chair - Size 5. Table The Table Must Be Have Dimensions Of 600 X 450 X 710 Mm (Width X Depth X Height), 5 Mm The Longitudinal Beam Must Be It Will Be Manufactured In A Tube With An Oblong Section Of 29 The Duty Structure? Receive Electrostatic Painting In Gray Color, With Injected Plastic Tips In Green Color. The Feet Must Be Made Of Cold-Rolled Carbon Steel Tube With Stitching, 5 Mm. The Leveling Shoes And Tips Must Be Inj, Lot 1 - School Set - Student Table And Chair - Size 4. School Set? Table And Chair For Student? Size 4 Table A Table Duty? Have Dimensions Of 600 X 450 X 644 Mm (Width X Depth X Height), With Injected Plastic Tips In Red. The Feet Must Be Made Of Cold-Rolled Carbon Steel Tube With Stitching, With A Circular Section Of 38 Mm (1?) And Thickness, Lot 1 - School Set - Student Table And Chair - Size 3. School Set? Table And Chair For Student? Size 3 Table A Table Duty? Have Dimensions Of 600 X 450 X 594 Mm (Width X Depth X Height), With Plastic Tips Injected In Yellow. The Feet Must Be Made Of Cold-Rolled Carbon Steel Tube With Stitching, Lot 1 - Set Consisting Of A Table And A Chair For Student Size 1. Set Consisting Of A Table And A Chair For A Pair
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
