Bids Are Invited For Hiring A Specialized Company To Provide Technical Services For The Assembly Of A Pumping System, Pipeline And Control Trestles, For Irrigation Of A Corn Area Of ​​Approximately 17 Hectares In Order To Meet The Needs Of The If Sertão Pe - Supera Bahia Project, Including Labor And All Necessary Materials Listed In Item 1.2 And In Annex Iii - Project For The Foundation For Technological And Cultural Education Of Paraíba Funetec - Pb

Lot 1 - Excavation, Assembly And Technical Assistance Service. Excavation Of 1,200 Assembly Of The Hydraulic And Electrical Structure., Lot 1 - Rigid Pvc Tube Lf Irriga Defofo, Jei Dn 200 Mm, Pn 60 Mca (Piece Of 6.00 M). Application: Irrigation, Blue Color; Wall Thickness ≥ 5.00 Mm., Lot 1 - Rigid Pvc Tube Lf Weldable Irrigation Plb, Dn 150Mm, Blue Color; Wall Thickness ≥ 4, Dn 125 Mm, Color Blue; Wall Thickness ≥ 3, 40 Mm., Dn 100 Mm, Color Blue; Wall Thickness ≥ 2.80 Mm., Lot 1 - Rigid Pvc Tube Lf Irrigasoldable Plb, Dn 50 Mm, Pn 80Mca (Piece Of 6, Blue Color; Wall Thickness ≥ 1.90 Mm., Lot 1 - Motor Pump For Working Flow ≥ 47.80 M3/H And Manometric Height Of 60 Mca ± 2.00 Mca. Provided With Inertia Flywheel For 0.40 Kgf*M2. Pump: Bearing With Semi-Open Rotor(S), In Gg-20 Cast Iron, Gg-20 Cast Iron Housing, Gg-20 Cast Iron Intermediate, Oring Sealing Ring Housing In Buna N., Mechanical Seal With Graphite And Ceramic Faces, Spring In Stainless Steel 304 And Elastomer (Rubber) In Buna N., Flanged Nozzles According To Standard Ansi B16.1, Accompanying Counter Flange For Bsp Thread, Suction 2.1/2 And Discharge 1.1/2, Or Similar. Motor: Three-Phase In Ii Poles, 60 Hz, 3500 Rpm, Ip 55 Or Higher, Efficiency 89% Or Higher, Fs 1, 15 Or Higher., Lot 1 - Soft Starter Switch For Three-Phase Motor Of 20 Hp, 60 Hz And 3500 Rpm., Lot 1 - Base For 20 Hp Motor Pump. Leveling Bases, Screws And Other Fastener Parts., Lot 1 - Custom Made Metal Barrel, Dn 200 Mm And Length ≥ 3.00, With 4 Outlets For 100 Mm Flange And 3 Outlets For Thread ≥ 1 Inch With 2 100 Mm Bases, Flanged, For Connection With. Motor Pumps, Equipped With Concentric Reduction Compatible With The Pump Discharge Diameter, Check Valve And 100 Mm Butterfly Register, Location For Priming With Easy-To-Use Closing Device, Metal Ball Register Type ≥ ¾ Inch. Mm, With Length, Inlets And Outlets Compatible With The Filtration System, Equipped With 2 Butterfly Valves For Each Filter, With A Diameter Compatible With The Piping, Counterflanges And Connection Pieces., Lot 1 - Set Of 120 Mesh (130 Micron) Or Greater Disc Filters, For ≥ 120 M3 /H. ≥ 4 Inches. In Plastic Material, Preferably With Closing Element By Easy To Handle Metal Clamp., Lot 1 - Relief Valve Of 2 Inches, Or Higher., Lot 1 - Suction Cup Valve, In Plastic Material Preferably With Conical Float, Of 1 Inch., Lot 1 - Piloted Hydraulic Valve 2 Inches. Plastic Material., Lot 1 - Metal Check Valve, 6 Inches, Preferably Clasar Type., Lot 1 - 50 Mm Weldable Pvc Ball Valve (Register), Lot 1 - 50 Mm Weldable Pvc Cap, Lot 1 - 45º Curve In Defofo Pvc Dn 200 Mm., Lot 1 - 90º Curve In Defofo Pvc Dn 200 Mm., Lot 1 - 90 Curve In Weldable Pvc Dn 150 .Mm, Lot 1 - 45º Curve In Weldable Pvc Dn 100 Mm., Lot 1 - 90º Curve In Weldable Pvc Dn 100 Mm., Lot 1 - 90° Bend In Weldable Pvc 50 Mm., Lot 1 - Te In Pvc With Reduction Of Fluff Dn 200 X 100 Mm Irr., Lot 1 - Te In Weldable Pvc With Reduction Dn 150