Request For Quotation Procurement Of Medical Products

Antiglaucomatous Drainage Resorbable For Surgical Treatment Of Glaucoma Model Dda/Tda, Composite Material Based On Polylactic Acid And Polyethylene Glycol With The Addition Of Nano-Silver, Porous Structure, Thickness: 0.15 Mm, Width: 5.2 Mm (+/- 0.2 Mm), Length: 2.0 Mm (+/- 0.2 Mm) Sterile. Antiglaucomatous Drainage Resorbable For The Surgical Treatment Of Glaucoma Model Dma/Tma, Composite Material Based On Polylactic Acid And Polyethylene Glycol With The Addition Of Nano-Silver, Porous Structure, Thickness: 0.15 Mm, Width: 2.8 Mm (+/- 0.2 Mm), Length: 2.0 Mm (+/- 0.2 Mm) Sterile., Determines The Ergonomics Of The Product. Determines The Efficiency Of Irrigation Flow. Length, 200 Mm. Inner Diameter Of Tip, 0.47 Mm. Outer Diameter Of Tip, 0.53 Mm. 6 Pcs Per Pack, Cartridges Must Be A Plastic Structure With A Hole For Lens Insertion On One Side And A Hole For Lens Implantation On The Other Side. Cartridges Must Be Single Use. Cartridges Must Be Used In Conjunction With The Monarch Iii Intraocular Lens Implantation System And Must Be Designed To Fold And Implant An Intraocular Lens During Cataract Surgery. The Shelf Life Must Be At Least 3 Years. Technical Characteristics: Length - No More Than 4.17 Cm, Width No More Than 0.57 Cm, Width Of The Working Part No More Than 2.8 Mm., Sterile, Physiologically Balanced Saline Solution, Each Ml Of Which Must Contain At Least 0.64% Sodium Chloride, At Least 0.075% Potassium Chloride, At Least 0.048% Calcium Chloride Dihydrate, At Least 0.03% Magnesium Chloride Hexahydrate, At Least 0.39% Sodium Acetate Trihydrate, At Least 0.17% Sodium Citrate Dihydrate, And Sodium Hydroxide And/Or Hydrochloric Acid (To Adjust The Ph) And Water For Injection. Sterile Intraocular Irrigation Solution Bss Shall Be A Sterile Balanced Salt Saline Solution For Extraocular And Intraocular Irrigation. Must Be Used To Calibrate And Adjust The Intraocular Pressure Monitoring System. Should Be Used During Surgical Procedures On The Anterior Segment Of The Eye. The Solution Must Be Compatible With The Centurion Ophthalmic Surgical System. Pack Of 6 Pcs., Ophthalmic Suture Material Black Nylon Monofilament, Size 9-0, Length 30Cm (12), Needles, Sterile, Single Use, Identity (Ir Spectroscopy) Corresponds To The Standard Viscosity 5000 - 5700 Mpa.S (Cst) (Centistokes) Specific Gravity 0.96 - 0.98 G / Cm 3 Refractive Index 1.4030 -1.4050 Volatility 0-0.1% Polydispersity 1.0-2.3 Content Of End Groups Si-Oh 0- 100 Ppm Resistivity 1.0-200 X 1015 Ohm X Cm Type Of Injection Device Glass Syringe, Volume 10 M, An Ophthalmic Knife, Sterile, Disposable, Should Consist Of Two Parts - A Cutting Blade And A Handle. The Blade Must Be Made Of Stainless Steel (Grade 420) (Ss). Handles Should Be Made Of Polycarbonate Or Abs. Ophthalmic Knives, Sterile, Disposable, Should Be Intended For Ophthalmic Surgeons To Make Cuts, Tunnels, Pockets During Ophthalmic Surgical Procedures. Knives Must Be Packed In Blister Packs. The Blade Should Be Sharpened At An Angle Of 45 Degrees. An Ophthalmic Knife, Sterile, Single-Use, Should Be Prescribed For Performing Scleral, Limbal Incisions, Paracenteses, As Well As For A Wide Range Of Other Surgical Procedures Used In Ophthalmic Surgery. Characteristics: The Length Of The Knife Should Vary From 2.4Mm To 5Mm, The Width At The Widest Part Of The Blade Should Be From 0.75 To 1.85Mm., Disposable Knives Are Made Of Unique, Austenitic (Corrosion-Resistant, Chromium-Nickel - Nominal Content Of 18% Chromium And 10% Nickel Steel. Alloying With Nickel Transfers The Steel To The Austenitic Class. This Provides The Steel With High Manufacturability, In Particular, Increased Ductility, As Well As Unique Service Properties) Stainless Steel, Using The Pressing Method, Which Makes The Knife Blades Strong, Sharp, And Stable To The Rift. An Advantage In The Production Of Disposable Knives Is The Method Of “Triple Sharpening” Of The Blade, Which Guarantees A More Precise Cut, Resulting In A Clear Comparison Of The Edges Of The Wound And Ensuring Sufficient Sealing And Healing. Shape And Structure: This Product Is A Sterile Knife With A Handle. This Type Of Knife Is Folded Inside A Case Made Of High-Strength Thermoplastic Resin! Main Material: Handle: Polybutylene Terephthalate (Pbt)Polycarbonate (For Guarded Blade Knife Only), Blade: Stainless Steel (Containing Nickel And Chromium) Coating: Silicone (Except Corneal/Scleral Knife And Guarded Blade Knife), Handle: High-Strength Thermoplastic Resin, Cover: High-Strength Thermoplastic Resin Coating: Silicone (Except Spherical/Scleral Knife) Specifications: Vickers Hardness Is 500Hv Or More For Stainless Steel Blades. Scope Of Application: Ophthalmic Knives Are Used In Ophthalmology And Eye Surgery. Used To Make An Incision And Insert Into The Eyeball. Allows For Cutting And Delamination Of Tissues; For Extracapsular Cataract Extraction., Ophthalmic Suture Material Black Nylon Monofilament, Size 10-0, Length 30Cm (12), Needles, Sterile, Single Use, Kinematic Viscosity (At 25Oc) 2.9 Cst. Specific Gravity (At 25Oc) 1.908 - 1.960 G/Cm 3 Refractive Index (At 20O C) 1.313 - 1.315 Boiling Point 140.4Oc - 142.4Oc Saturated Vapor Pressure (At 37Oc) 12.5 Mm Hg Surface Tension 0.0193 N/M Interfacial Tension 0.0578 N/M Gas Solubility For Oxygen (At 37Oc) 45 Vol. % Gas Solubility For Carbon Dioxide (At 37 O C) 134 Vol. %Molecular Weight 462Packaging Type 7 Ml Glass Bottle, Disposable Knives Are Made Of Unique, Austenitic (Corrosion-Resistant, Chromium-Nickel - Nominal Content Of 18% Chromium And 10% Nickel Steel. Alloying With Nickel Transfers The Steel To The Austenitic Class. This Provides The Steel With High Manufacturability, In Particular, Increased Ductility, As Well As Unique Service Properties) Stainless Steel, Using The Pressing Method, Which Makes The Knife Blades Strong, Sharp, And Stable To The Rift. An Advantage In The Production Of Disposable Knives Is The Method Of “Triple Sharpening” Of The Blade, Which Guarantees A More Precise Cut, Resulting In A Clear Comparison Of The Edges Of The Wound And Ensuring Sufficient Sealing And Healing. Vickers Hardness Is 500Hv Or More For Stainless Steel Blades. This Product Is A Sterile Knife With A Handle. This Type Of Knife Is Folded Inside A Case Made Of High-Strength Thermoplastic Resin! Main Material: Handle: Polybutylene Terephthalate (Pbt) Polycarbonate (For Guarded Blade Knife Only), Blade: Stainless Steel (Contains Nickel And Chrome). Coating: Silicone (Except For Corneal/Scleral Knife And Guarded Blade) Handle: High-Strength Thermoplastic Resin Cover: High-Strength Thermoplastic Resin Coating: Silicone (Except For Spherical/Scleral Knife) Application: Ophthalmic Knives Are Used In Ophthalmology, Eye Surgery. Used To Make An Incision And Insert Into The Eyeball., It Is A Clear, Sterile, Isotonic And Viscoelastic Hydroxypropyl Methylcellulose Formulation Intended For Intraocular Use And Dissolved In Buffered Saline (Ph 6.8-7.5). The Hydrogel Contains 2.0% Or 2.4% Hydroxypropyl Methylcellulose (Customers Choice) And Is In A Ready-Made Syringe Intended For Single Use. The Syringe Is Placed In A Sterile Package. The Cannula Is Packaged Separately From The Syringe. The Product Does Not Contain Preservatives. The Product Has Been Steam Sterilized As Required For Injectable Products And Is Non-Pyrogenic., Solid Polymer Rings For Stabilizing The Lens Capsule, Monolithic, Transparent, Vertical Size 10.6+0.6 Mm, Horizontal Size 12.9+0.6 Mm, Kit For Introducing Viscous Liquids Viscous Fluid Control (Vfc) For Equipment Ophthalmic Surgical System Constellation Vision System - Used For Work On The Posterior Segment Of The Eye. It Is An Integral Part Of The System., Ophthalmic Suture Material Black Nylon Monofilament, Size 8-0, Length 30Cm (12), Needles, Sterile, Single Use, Silicone Oil With Injection Device, Sterile, Single Use, In A 10 Ml Glass Syringe. Identity (Ir Spectroscopy) Corresponds To The Standard Viscosity 1300 Mpa.S (Cst)(Centistokes), Gravity Flow Control Systems (Units) From The Centurion® Vision System Ophthalmic Surgical System Should Be Replaceable, Disposable Consumable Components For The Centurion Vision Ophthalmic System And Used During Operation. The System Type Should Be Determined Automatically When It Is Installed In The Liquid Module. When Installing The System Into The Fluid Module Of The Console, All Necessary Hydraulic Connector Connections Should Be Made Automatically, Facilitating Easy And Quick Surgical Installation. The System Must Be The Interface Between The Centurion Console And The Surgical Handpiece. Gravity Fluidics Should Be Used For Fluid Control Using An Electric Infusion Stand. Pack Of 6 Pcs.