Summer Diesel Fuel In Coupons Or Smart Cards Tr Cu 013/2011 “On Requirements For Automobile And Aviation Gasoline, Diesel And Marine Fuel, Jet Fuel And Fuel Oil” (Approved By Decision Of The Customs Union Commission Dated October 18, 2011 No. 826); Gost 305-2013 “Diesel Fuel. Technical Conditions; Sp Rk 3.03-107-2013 “Stationary Type Gas Stations”. 2) Ecological Class Of Fuel Is Not Lower Than K-4. 3) Fuel Must Comply With All Approved Standards, Technical Regulations, National And/Or Interstate Standards. Requirements For Fuel Coupons: Fuel Coupons Are A Form Of Payment For The Goods Between The Customer And The Supplier At The Supplier’S Gas Stations (Hereinafter Referred To As Gas Stations). 1) Each Coupon Must Indicate The Type Of Fuel, Denomination, Supplier’S Seal, And A Unique Barcode. 2) Validity Period – Until December 31, 2026 Inclusive; Delivery Time Until 02/15/2026 3) Area Of Validity Of The Coupon - Coupons Must Be Accepted: - At Least 4 (Four) Gas Stations Within The Boundaries And/Or Outskirts Of Aktau; Coupons Must Be Accepted At Gas Stations That Meet The Requirements Of Sp Rk 3.03-107-2013 “Stationary-Type Gas Stations.” 4) The Time For Accepting Coupons Is Around The Clock, Without Breaks Or Weekends. Coupons Must Have One Or More Of The Specified Security Measures Such As Watermarks, Holograms, Special Paper, Special Ink, Graphic Security Elements, Etc. 7) There Should Be No Limits On The Supply Of Goods. Place Of Delivery Of Electronic Coupons: Kazakhstan, Mangistau Region, Aktau City, 11 A Microdistrict, Building 5, Usso Of Mangistau Region., Technical Specifications For Gasoline Ai-92 In Coupons Or Smart Cards. Тр Тс 013/2011 «О Требованиях К Автомобильному И Авиационному Бензину, Дизельному И Судовому Топливу, Топливу Для Реактивных Двигателей И Мазуту» (Утвержден Решением Комиссии Таможенного Союза От 18 Октября 2011 Года № 826); Gost 32513-2013 “Motor Fuels. Unleaded Gasoline. Technical Conditions; Sp Rk 3.03-107-2013 “Stationary Type Gas Stations”. Требования К Техническим, Качественным Характеристикам Товара: 2) Экологический Класс Топлива Не Ниже К-4. 3) Топливо Должно Соответствовать Всем Утвержденным Нормам, Техническим Регламентам, Национальным И/Или Межгосударственным Стандартам 4) Поставщик – Владелец Товара. Требования К Талонам На Топливо: Талоны На Топливо - Это Форма Расчетов За Товар Между Заказчиком И Поставщиком На Автозаправочных Станциях (Далее – Азс) Поставщика. Ареал Действия Талона - Талоны Должны Приниматься: - Не Менее Чем В 4 (Четырех) Азс В Черте И/Или Окраинах Г.Актау; Coupons Must Be Accepted At Gas Stations That Meet The Requirements Of Sp Rk 3.03-107-2013 “Stationary-Type Gas Stations.” 4) The Time For Accepting Coupons Is Around The Clock, Without Breaks Or Weekends. 7) There Should Be No Limits On The Supply Of Goods. Поставка Талонов До 15.02.2026 Года Срок Годности До 31.12.2026Г : Казахстан, Мангистауская Область, Город Актау, 11 А Мкрн., Здание 5, Уссо Мангистауской Области, 10W-40 10W Motor Oil, Semi-Synthetic., 5W-30 Motor Oil Is A Multi-Grade Synthetic Or Semi-Synthetic Oil With Excellent Low Temperature Fluidity (5W) For Easy Winter Starting, And Sufficient Viscosity (30) To Protect Modern Gasoline And Diesel Engines At Operating Temperature, Suitable For Most Vehicles With Turbocharging And Aftertreatment Systems. It Should Be Used In Accordance With The Vehicle Manufacturers Approvals, As There Are Different Types: For Asian/American (Api Sn, Ilsac Gf-5) Or European (Acea C3, Vw, Bmw, Mb) Engines, With Additives For Protection Against Lspi And Fuel Economy., High Quality Motor Oil For Diesel Engines. Oil Type Semi-Synthetic, Api Standard - Sj, Properties: 1 - Sulfate Ash, % Weight, Astm D874, 0.87 - Density At 15.6 °C, G/Ml, Astm D4052, 230 - Flash Point In An Open Cleveland Crucible, °C, Astm D 92, 3.6 - Viscosity At High Temperature And High Shear Rate At 150°C, 1X10(6) S(-1), Mpa*S, Astm D 4683, 13.2 - Kinematic Viscosity At 100 °C, Mm2/S, Astm D445, 88.7 - Kinematic Viscosity At 40 °C, Mm2/S, Astm D445, -42 - Pour Point, °C, Astm D97, 150 - Viscosity Index, Astm D2270, Must Be Agreed With The Customer Before Participation And Delivery.
