(L1) 6510.19080-Dressing, Presentation: For Fixation Of Short-Term Peripheral Venous Catheter Adhesive Strips That Accompany The Dressing To Stabilize And Reinforce The Fixation Of The Catheter. Measuring Approximately 5X7cm, Packaging: Individual, In Surgical Grade Paper Or In A Type Of Material That Is Compatible With The Sterilization Method. Product Registered With Anvisa/Ms. The Characteristics Of The Packaging Must Comply With The Specific Standards Of Abnt E Ms, Unid. Size: Unit, (L2) 6510.19080-Dressing, (L3) 6510.19081-Dressing, Presentation: For Fixing Peripheral And Central Venous Catheters, Long-Term, Adult, Composed Of Transparent Polyurethane Film, Hypoallergenic, Semi-Permeable, With High Permeability To Oxygen And Gas Exchange, Preventing The Permanence Of Moisture Under The Dressing, Reducing The Risk Of Infection, With A Frame Application System, It Has A Reinforced Slit Providing Better Fixation And Adhesive Strips To Stabilize And Reinforce Catheter Fixation, Approximate Dimension: 9Cm Packaging, (L4) 6510.19081-Dressing, (L5) 6510.19109-Dressing, Pediatric, Approximate Dimension: 7Cm 6510.24702-20Ml Disposable Luer Slip Syringe, Without Needle; Made Of Polypropylene Or Other Plastic, Non-Toxic, Non-Pyrogenic, Intact, Suitable And Transparent, Allowing Clear Visualization Of The Aspirated Fluid. Straight Cylindrical Body, With Perfect Internal Finish, Uniform Wall In Its Thickness. It Must Allow The Free And Smooth Movement Of The Plunger, With A Retaining Ring At The Distal End That Prevents The Plunger From Detaching From The Cylinder. Flange In A Suitable Format To Support The Fingers And Provide Stability To The Syringe When Placed On A Flat Surface. Marking: The Graduation Scale Must Be Applied To The External Surface Of The Cylinder Body, With A High Degree Of Accuracy, Traces And Inscription Number Clear, Legible Without Flaws, Remaining Clear Until The Moment Of Use. The Traces Must Have A Uniform Thickness To Be Free From Irregularities Between The Spacings. The Graduation Scale Must Be Facing Up, Being Easy To View, When The Cylinder Body Is In The Use Position. Similar Brands Descriptive Complement: Siliconized Rubber Plunger Suitable For Better Slider Gliding, Molded To Facilitate Aspiration And Injection Of Fluids. It Must Have A Stopper At The Proximal End, Suitably Adjustable To The Body, Preventing Leaks, And Firmly Fixed To Avoid Displacement During Aspiration. The Plunger Stopper Must Be Made Of Latex-Free, Inert Material, Free From Defects, Burrs, And Must Ensure Smooth Sliding Throughout. During Aspiration And/Or Injection It Cannot Be Separated From The Rod. Dimensions: The Syringes Specified Here Must Be Sized In Accordance With Universally Adopted Standards, And The Assembled Set Must Have The Distal End Of The Plunger Highlighted In Relation To The Corresponding Body.
