Teachers Set Cjp-01 (Model Fde/Fnde) Composed Of 1 (One) Table And 1 (One) Chair - Individual Table With Top In Mdp Or Mdf, Covered On The Top Face In Melamine Laminate And On The Bottom Face In Balancing Plate, Mounted On A Tubular Steel Structure. Constituents - Table Top In Mdp Or Mdf, Covered On The Top Face In Laminate High Pressure Melamine, Textured Finish, In Gray Color And Rounded Corners. Coating On The Lower Face In Balancing Plate. Front Panel In Mdp Or Mdf, Covered On Both Sides In Low Pressure Melamine Laminate, Gray Finish. Tops Headed With Extruded Thermoplastic Maple Tape, Made Of Pvc; Pp Or Pe And Textured Surface Finish, In Grey, Glued. Structure Composed Of: - Vertical Uprights And Longitudinal Crossbeam Made Of Carbon Steel Tube In Plate 16 (1.5Mm) Or Greater Thickness. - Upper Beam Made Of Cold-Rolled Carbon Steel Tube Made Of Sheet 16 (1.5Mm) Or Thicker, With Stitching, Curved In A C Shape - Feet Made Of Cold-Rolled Carbon Steel Tube Made Of Plate 16 (1, Circular Section. Fixing The Top To The Structure Using Threaded Nuts And Screws. Fixing The Shoes To The Feet Using Rivets. Tips And Shoes In Virgin Polypropylene Copolymer, Free Of Mineral Fillers, Injected In Gray, Fixed To The Structure Through Fittings. Anti-Rust Treatment Must Be Applied To The Metal Parts. Painting Of Metallic Elements In Gray Paint. 650Mm (Depth) Constituents - Chair With Seat And Back In Polypropylene Copolymer, Student Set Size 6 Student Set Cja-06 (Model Fde/Fnde) Composed Of 1 (One) Table And 1 (One) Chair. Suitable For Students With A Height Between 159 And 188Cm Certified By Inmetro And In Compliance With Abnt Standards. Individual Table With Top In Mdp Or 188Cm. Mdf, Mounted On A Tubular Steel Structure, Containing Book Holders In Injected Plastic. - Table Top In Mdp Or Mdf, In Gray And Rounded Corners. Structure Composed Of: - Vertical Uprights And Crossbar. Longitudinal Made Of Carbon Steel Tube, In Plate 16 (1.5Mm) Or Greater Thickness. Minerals, Injected In Gray Color. Fixing The Top To The Structure Using Nuts And Threaded Screws. Fixing The Book Holder To The Longitudinal Cross Member Using Rivets. Fixing The Shoes To The Feet Using Rivets. Tips And Shoes In Virgin Polypropylene Copolymer, Injected In Blue, Fixed To The Structure Using Fittings. Antirust Treatment Applied. Painting Of Metallic Elements In Gray Paint. Approximate Dimensions 600Mm (Width) X 450Mm (Depth)
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
