Bids Are Invited For Contracting, Through The Price Registration System Of A Specialized Company For The Supply Of Consumable Materials And Dental Equipment For The Oral Health Teams Of Primary Health Care In The Municipality Of Monte Negro, Aiming To Meet The Care Demands Of The Basic Health Units, The Mobile Dental Unit (Uom) And The New Dental Offices Foreseen In The Municipal Planning.

Waste Bin With Lid Opening By Pedal Operation, Made Of Stainless Steel Material With A Capacity Of 30 Liters, Made Of Stainless Steel Material With A Capacity Of 50 Liters, Water Distiller - Low Energy Consumption; Time To Distill 150 Ml Of Water: 19 Minutes; Time To Distill 300 Ml Of Water: 37 Minutes; No Hydraulic Installation Required; Complete Cycle Duration: 6 To 8 Hours. Capacity To Distill Up To 3.8 Liters. 127 V. Minimum Warranty 12 Months., Complete Dental Office Consists Of Dental Chair, Equipment, Water Unit And Reflector, Forming An Ergonomic, Silent And Highly Durable Monoblock Set, Suitable For Clinical Use In Ambient Healthcare. This Chair Is Made Of Anti-Corrosion Treated Steel With Electrostatic Painting, Base With Edge Non-Slip That Does Not Require Fixing To The Floor And An Electric Lifting Pantograph System Capable Of Withstanding A Minimum Load Of 200 Kg. The Operation Is Carried Out By A Multifunctional Pedal With Automatic Return To Zero Position And Reflector Control Function, Allowing Smooth And Precise Movements. The Cab Backrest Is Bi-Articulated And Adjustable In Height And Inclination, And The Anatomical Upholstery, Made Of Waterproof Material, Washable And Resistant To Hospital Disinfection, Guarantees Patient Comfort And Easy Cleaning. The Equipment Has A Pantograph Arm With Pneumatic Locking, A Progressive Pedal And At Least Three Outputs For High Rotation, B Rotation And A Triple Autoclavable Metal Syringe, With An Individual Air And Water System And Removable Smooth Hoses For Cleaning. The Water Unit Features A One-Liter Translucent Reservoir, Removable And Autoclavable, Deep Porcelain Cuba With Drain And Filter, Triple Auxiliary Syringe And Venturi Sucker Or Vacuum System Compatible With The Offices Hydraulic Network. The Reflector Is Of The Led Type, With Adjustable Intensity Between Eight And Thirty-Five Thousand Lux, Articulated Head In Three Axes And Adjustable Focus, Guaranteeing Uniform Illumination, Oil-Free Air Compressor, With 40 L Reservoir, 1.2 Hp (850 W) Motor, Single-Phase Power Supply At 127 V Or 220 V, Nominal Rotation Of 1,750 Rpm, Flow Rate Of 220 L/Min, Maximum Working Pressure Of 120 Psi (0.83 Mpa) And Minimum Of 80 Psi (0.55 Mpa), Reduced Noise Level Of 54 Db, Approximate Net Weight Of 30.5 Kg And Dimensions Of 54.2 33 60 Cm. The Equipment Has A Control Panel With Pressure Switch, Double Pressure Gauges, Safety Valve, Air Inlet Filter With Drain, Automatic Draining Of The Reservoir, Rigid System Certified By Inmetro, And Is Recommended For Use In Dental Offices Or Clinics With Up To Two Offices, With Or Without A Vacuum Pump. The Equipment Must Come New, With Original Sealed Packaging, Registration With The Competent Health Authority, Minimum Warranty Of 12 Months Against Manufacturing Defects And National Technical Support., 01/05/2026 - 14:11:55, Dental Led Photopolymerization Equipment In Wireless Technology, With Injected Abs Body, Length With Tip Of Approximately 24 Cm And Handpiece Weighing Approximately 0.151 Kg, Operable In Automatic Bivolt Voltage 100 To 240 V, Frequency 50/60 Hz. Operates In Three Modes Of Continuous Use, Ortho And High, Presenting Light Intensity Of Approximately 1,250 Mw/Cm² In Continuous Mode, 2,300 Mw/Cm² In Ortho Mode 2,500 Mw/Cm² In High Mode, With A Wavelength Of 420 To 480 Nm For Activating Standard Composite Resin Photoinitiators. Features Programmable Digital Timer