Tenders Are Invited For Modernization Of The Roof And Facade Of The Womp Building In Kielce - Repeated Procedure Iii

The Subject Of The Order Are Construction Works Consisting In The Modernization Of The Roof And Façade Of The Womp Building In Kielce In Accordance With The Detailed Description Of The Subject Of The Order Specified In The Annexes To The Specifications Of The Terms Of Reference And The Technical Documentation. The Works Will Include:A. Insulation Of The Flat Roof With 30 Cm Thick Stone Wool Granules With A Coefficient Of 0.042 W/Mk, Reaction To Fire Class A1b. Moisture Insulation Of The Roof Surface1. Sloping Slopes2. Installation Of Thermally Weldable Underlay Felt 4.2 Mm3 Thick. Installation Of Thermally Weldable Felt For The Top Covering Thickness. 5.2Mm Modified Sbs, Resistant To Flowing At A Temperature Of Min. 100°C, Flexibility At Low Temperature -25°C4. Preparation Of Sheet Metal Work For Chimneys, Firewalls And Cornice5. Construction Of A New Gutter Strip Under And Above The Gutter On A Wooden Substructure6. Replacement Of Roof Gutters And Downpipes With Inclusion In The Reconstructed Rainwater Drainage System7. Insulation Of Chimney Shafts And Gutter Cornice With Eps 100 Gr 5Cm Polystyrene Boards Together With Silicone Coating And Installation Of Metal Chimney Grates8. Construction Of A New Lightning Protection Installationc. Construction Of A Ventilated Façade Using Hpl1 Boards. Dismantling The Logo2. Disassembly And Reassembly Of Elements Installed On The Facade, I.E. Air Conditioners, Cameras, Sirens, Etc.3. Forging Existing Cladding Into External Glyphs4. Cleaning The Existing Substrate - Washing And Removing Fungus5. Making Sockets In The Load-Bearing Wall For Mounting Consoles6. Supplementing The Insulation In Sockets With Mineral Wool7. Installation Of An Aluminum Substructure Dedicated To Ventilated Facades8. Laying And Attaching Wool Laminated With 12 Cm Thick Glass Wool With A Coefficient Of 0.032 W/Mk9. Cladding Made Of 8Mm Thick Hpl Boards - Non-Flammable: Class A2-S1, D0;10. Installation Of Dismantled Elements, I.E. Air Intake Grilles, Balustrades, Inspection Doors, Installation Of New Galvanized, Powder-Coated Elements11. Construction Of A New Under-Plaster Lightning Protection Installationd. Insulation Of Walls Below The Ground1. Dismantling The Concrete Band2. Excavation Of Foundation Walls3. Dismantling The Rim From The Hoop Shop4. Disassembly Of The Existing Storm Sewage System And Perimeter Drainage5. Cleaning The Wall6. Reflection Of Plaster7. Application Of New Plaster - Cement And Lime Plaster8. Moisture Insulation Of Walls - Two-Component Kmb Mass, Thick Layer, 5 Mm Thick, After Prior Priming, Additionally A Glass Fiber Mat To Strengthen Bituminous Coatings9. Thermal Insulation Made Of 10 Cm Thick Xps Boards With Parameters: 0.036 W/Mk, Compressive Strength At 10% Cs Deformation - 300 Kpa,10. Installation Of Dimpled Foil11. Reconstruction Of Storm Sewage And Perimeter Drainage12. Laying A New Rim Of Hoop Iron 30X4mm13. Backfilling Of Excavations14. Reconstruction Of A 100Cm Wide Band - Edge + 6Cm15 Thick Concrete