Bids Are Invited For Acquisition And Installation Of External Gym Equipment To Create An Outdoor Gym Next To The Family Health Strategy (Esf) 11, Located In Vila Jaguari.

Lot 1 - Individual Straight Bar - Individual Straight Bar: Type: Outdoor Gymnastics Equipment Of The Straight Bar Type, For 01 (One) User At A Time; Purpose: Strengthening Upper Limbs, Especially Back, Biceps, Shoulders And Trunk Support Muscles; Structure: Column(S) In Carbon Steel Tube, Minimum Diameter 2 And Minimum Thickness 2.00 Mm; Exercise Bar Made Of Carbon Steel Tube With A Diameter Suitable For The Grip, Height Compatible With Adult Use; Steel Sheet Base With A Minimum Thickness Of 6.30 Mm, Prepared For Anchor Bolts Or Embedding In Concrete; Finish: Smooth Surfaces, Without Burrs, Sharp Corners Or Dangerous Recesses; Surface Treatment: Phosphating Or Similar + Polyester/Epoxy Powder Painting, Using Electrostatic Process, Curing In Oven; Fixing: Reinforced Concrete Block(S) Fck ≥ 20 Mpa, Minimum Reference Dimensions 0.40 X 0.60 M Or According To The Manufacturers Manual; Identification Plate: With Manufacturer Data, Model, Year, User Capacity And Serial Number; Plaque/Instruction For General Use Of The Gym Or Individual Containing Safety Recommendations And Minimum Age Range Of 14 Years., Lot 1 - Individual Elliptical - Individual Elliptical: Type: Individual Elliptical, Use By 01 User; Purpose: Cardiorespiratory Conditioning And Strengthening Of Lower And Upper Limbs, With Elliptical Movement With Low Joint Load; Structure: Carbon Steel Tube Column, Minimum Diameter 2, Esp. Min. 2.00 Mm, Based On Plate 6.30 Mm; Movable Arms In Carbon Steel Tube, Min Diameter 1 1/4, Size Min. 1, 50 Mm, With Handles; Special Steel Plate Pedals. Min. 2, With Non-Slip Surface; High Strength Steel Shafts, Bushings/Bearings/Bearings For Smooth Movement; Operating System: Mechanical, Driven By The Users Weight And Movement, Without The Use Of Electricity; Surface Treatment And Painting: According To General Item (Anti-Corrosion Treatment + Electrostatic Powder Painting); Fixing And Foundation: Using Metal Anchors Or Embedding In A Concrete Block (Min. Ref. 0.60 M); Identification Plate And Instructions: According To General Standards., Lot 1 - Six Functions Multiexerciser - Six Functions Multiexerciser: Type: Six Functions Multiexerciser, Allowing The Execution Of At Least Six Different Exercises In The Same Set; Purpose: Exercises For Upper Limbs, Lower Limbs And Torso, Including, For Example: High Pull-Up, Rowing, Chest/Lat, Shoulder Rotation, Support For Push-Ups/Abdominals Or Equivalent; Use: Multiple Simultaneous Users, According To The Manufacturers Design (3 To 6 Users); Structure: Main Columns In 2.00 Mm Carbon Steel Tube; Sleepers In Tubes 1 1/2 (Or Higher), 50 Mm; Seats And Supports (When Applicable) Made Of Sheet Steel Esp. Min. 1, May Have Plastic/Rubber Coating; Footrests In Sheet Steel Esp. Min. 2, With Non-Slip Surface; Steel Shafts, With Bushings/Bearings Dimensioned For Intense Use; Welds: Mig Or Similar Process, Continuous, Without Cracks Or Porosities; Surface Treatment/Painting And Foundation: According To General Standard; Plates: Set Identification Plate; Instruction Plate Indicating Each Of The Six Functions, Muscle Groups And Basic Guidelines For Use., Lot 1 - Individual Chest / Back - Individual Chest / Back: Type: Individual Chest / Back Equipment, Use By 01 User; Purpose: Strengthening The Pectoral, Back, Deltoid, Triceps And Biceps Muscles, Po