Bids Are Invited For Acquisition Of Materials For Maintenance Of The Traffic Light Park To Meet The Needs Of The Municipal Secretariat For Safety, Traffic And Urban Mobility Of The Tourist Resort Of Oímpia/Sp.
Bids Are Invited For Acquisition Of Materials For Maintenance Of The Traffic Light Park To Meet The Needs Of The Municipal Secretariat For Safety, Traffic And Urban Mobility Of The Tourist Resort Of Oímpia/Sp.
4-Way Pp Cable 1.5Mm With 750V Insulation With Internal Tensions In Red, Yellow, Green And Black. Traffic Light, For 1 Designed Arm, With Ø114mm In Diameter, 6M In Length, Wall 4.25Mm, In 1010 Steel, 40Mm Hole For Repeater Installation And 4 Anti-Rotation Fins, Hot-Dip Galvanized After All Welding And Bending Processes., Arm Designed With 101Mm In Diameter, 4.7M Projection, 3.75Mm Wall, Hot Galvanized After All Welding And Bending Processes, 200Mm Led Lamp For Focal Group, High Brightness, In Red, Green Or Yellow 264 Volts, 60Hz, Housing Body In Injected Polycarbonate., Focal Group Type I 3X200mm Repeater General Characteristics The Semaphore Focal Group Type I 200X200x200mm Must Be Assembled With Polycarbonate Boxes With Door Made With The Same Material, Containing Holes, Guides, Protrusions And Reinforcements Necessary For Fixing Of Eyelashes And Led Lamp. Led Lamps Must Be Installed: 1 Red, 1 Yellow And 1 Green In The Focal Group, In Accordance With The Brazilian Traffic Light Signaling Manual. The Led Lamps Used Must Meet The Specifications Already Set Out In The Specific Item. The Closing Of The Boxes Must Be Done With A Simple Clasp Without The Need To Use Tools For Opening And The Components Used Must Be Galvanized Or Made Of Stainless Steel. The Focus Box Must Be Sealed, Protecting The Led Lamp Against Weathering; Fixing Must Be Done With 2 (Two) Simple Aluminum Supports Painted In The Same Color As The Focal Group; The Focal Group Must Meet The Specifications Of Technical Standard Abnt Nbr 17141:2023 – Traffic Light Signaling – Semaphore Focal Group In Polycarbonate. All Focus Boxes Supplied, Even Those That Make Up Other Equipment, Must Be Of The Same Brand And Model, In Order To Comply With The Principle Of Standardization. Led Lamps Must Fully Comply With Technical Standard Nbr 15889/2019 - Traffic Light Module Based On Light Emitting Diodes (Led);, Focal Group Type I 3X200mm Main General Characteristics The Traffic Light Focal Group Type I 200X200x200mm Must Be Mounted With Polycarbonate Boxes With Door Made With The Same Material, Protrusions And Reinforcements Necessary For Attaching The Eyelashes And The Led Lamp. Led Lamps With A Diameter Of 200 Mm Must Be Installed: 1 Red, In Accordance With The Brazilian Traffic Light Signaling Manual. The Led Lamps Used Must Meet The Specifications Already Set Out In The Specific Item. The Closing Of The Boxes Must Be Done With A Simple Clasp Without The Need To Use Tools For Opening And The Components Used Must Be Galvanized Or Stainless Steel; The Focus Box Must Be Sealed, Protecting The Led Lamp Against Weathering; It Must Also Be Accompanied By An Aluminum Sun Screen, 1.5 Mm Thick, With Electrostatic Polyester Powder Painting And Reflective Film, Technical Grade, Outlining Its Contour (Edge), In Addition To Copper Spotlights (Eyelashes) Made Of 1.00 Mm Thick Aluminum, Painted In The Color Of The Box. Fixing Must Be Done With A Tilting Support For A 101Mm Traffic Light Arm Made Of Aluminum Painted In The Same Color As The Focal Group; The
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
