Bids Are Invited For Hiring Of A Specialized Company, Under The Contract Execution Regime For Global Price, Including Labor And Materials, With Aim For The Construction Of 20 (Twenty) Housing Units In The Municipality Of Morada Nova De Minas/Mg, With Resources Linked To The Mcmv Fnhis Sub 50, Arising From The Growth Acceleration Program (Pac) Through Commitment Term No. 987149/2025/Mcidades/Caixa.

Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, Supply And Installation Of Workplate With Galvanized Sheet And Wooden Structure. Atl. 2, 50M, For Office, Without Internal Partitions And Without Toilet (Does Not Include Mobilization/Demobilization), Temporary Water Connection For Site, Including Hydrometer And Easel For Water Measurement - Main Entrance, In Galvanized Steel Dn 20Mm (1/2) - Dealership Standard., Temporary Connection With Overhead Power Input, Cemig Standard, Installed Load Of 15.1 Kva Up To 30 Kva, Three-Phase, With Underground Output, Including Pole, Meter Box, Circuit Breaker, Busbar, Grounding And Accessories., General Foreman With Additional Charges., Full Civil Construction Engineer With Additional Charges., Mechanized Excavation For Crowning Block Or Footing With Backhoe (Including Excavation For Placement Of Forms). Af_01/2024, Mechanical Soil Compaction For Execution Of Raider, Concrete Floor Or Slab On Soil, With Percussion Soil Compactor. Af_09/2021, Separator Layer For Execution Of Radier, Concrete Floor Or Slab On The Ground, In Plastic Tarpaulin. Af_09/2021, Ballast With Granular Material (Crushed Stone N.2), Applied On Floors Or Slabs On Ground, Thickness Of *10Cm*. Af_01/2024, Manufacture, Assembly And Disassembly Of Radier Formwork, In Sawn Wood, 4 Uses. Af_09/2021, Slab Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022., Radier Concreting, Fck 30 Mpa - Laying, Densification And Finishing. Af_09/2021, Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, Surface Waterproofing With Polymeric Mortar/Acrylic Membrane, 3 Coats. Af_09/2023, Polyester Veil For Waterproofing, Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, Made Of Wooden Sheet And Resin Plywood, 8 Uses. Af_09/2020, Assembly And Disassembly Of Beam Formwork, Without Propping, Made Of Resin Wood Sheet, 8 Uses, Propping With Wooden Fork, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8 Ca-50 Steel, Unidirectional Precast Slab, Bi-Supported, For Floor, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) = (8+4). Af_11/2020, Concreting Of Pillars, Fck = 20 Mpa, Using Buckets - Laying, Thickening And Finishing., Concreting Of Beams And Slabs, For Any Type Of Slab With Buckets In A Single-Story Building - Laying, Thinning And Finishing, Masonry For Sealing Ceramic Blocks Drilled Horizontally Of 9X19x19 Cm (Thickness 9 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Lintel Cast In Situ In Concrete, Thickness Of *10*M. Af_03/2024, Molded Contraverga