Tenders Are Invited For Construction Work – New Building Fwh Notzingen - Lot 35 - Vhf Facade Work (Wood)

Construction Work – New Building Fwh Notzingen - Lot 35 - Vhf Facade Work (Wood). Lot 35 - Vhf Facade Work (Wood): Cladding Made Of Vertical Wooden Slats And Board Formwork On The Outside In Front Of The External Walls, Windows And Doors, External Wall Cladding, Facade Profile D/B 44/144 Mm, Approx. 400.00 M² - External Wall Cladding, Outdoors, Formwork Made Of Facade Profile D/B 44/144 Mm, Type Of Wood Modified Nordic Spruce, Technically Dried And Pressure Impregnated, Concealed Fasten To The Substructure With Screws Made Of Stainless Steel. . Vertical Wooden Slat Cladding 39/39 Mm, Approx. 64.00 M² - External Wall Cladding, Outdoors, Made Of Vertical Wooden Slats, Brushed, Sharp-Edged, W/D 39 Mm / 39 Mm, Center Distance Approx. 60 Mm, Wood Type Spruce. Uk Basic Battens 40/60Mm Rear Ventilation Level 272,000 M² - Substructure As Basic Battens Made Of Softwood Din 68365, Usage Class 0 Din 68800-1, Without Chemical Wood Protection. Cross Section 40/60 Mm, Lath Spacing 60 Cm, Attach To The On-Site Wooden Stud Wall In Accordance With Static Requirements. Uk Supporting Battens 30/50Mm, 460,000 M² - Substructure As Supporting Battens To Match The Wall Coverings Described Above, Made Of Softwood Din 68365, Usage Class 0 Din 68800-1, Without Chemical Wood Protection. Uk Lumber 60/100 Mm, 190M² - Substructure (Rear Ventilation Level) For External Wall Cladding, Made Of Lumber, Usage Class 0 Din 68800-1, Without Chemical Wood Protection. Thickness 100 Mm, Width 60 Mm, Center Distance Over 60 To 70 Cm, Attach To The On-Site Wooden Stud Wall In Accordance With Static Requirements. . Door Slat Covering 2 Pieces. - Cladding Of The Door Leaf Of The Steel-Glass Door. Made Of Vertical Wooden Slats Including Substructure Made Of 30/50 Mm Supporting Battens, Painted Opaque Umbra Gray (Ral 7022). Door Frame Prepared On Site With System-Related Fastening Options To Transfer The Additional Load Into The Door Construction. . Aluminum Substructure For Slats, 30,000 M² - Substructure Made Of Aluminum For The Vertical Slat Cladding Described Above In The Area Of ​​The Windows On The East Facade. With Posts And Bars Made Of Aluminum Rectangular Tube Profile 30/60 Mm, Welded And Screwed, Painted Umbra Gray (Ral 7022), Suitable For Outdoor Use, Attached With Angle Profiles To Load-Bearing Components Of The On-Site Wooden Structure, With All The Necessary Cuts And Drillings.