Tenders Are Invited For Agglomeration System Of Bicycle Paths In The Zit Mof Piła Area - Construction, Reconstruction And Expansion Of Pedestrian And Bicycle Routes And Bicycle Paths In Piła - Location Ii (Repeated Ii)

The Subject Of The Order Is The Construction Of A Pedestrian And Bicycle Route On The Extension Of Chatellerault Boulevards Along The Gwda River To The Sigismund The Old Bridge, Along With The Construction Of Lighting. The Design Documentation Assumes The Construction Of A Road For Pedestrians And Bicycles Along With The Construction Of Lighting And The Construction Of Retaining Walls On Plots With Registration Numbers 359/2, 359/3, 359/4, 388, 680, 682, 683, Piła 18 District. The Length Of The Construction Section Of The Pedestrian And Bicycle Infrastructure Is Approximately 430 M. The Project Assumes The Construction Of A Pedestrian And Bicycle Route. With The Surface Of The Pedestrian Parts Made Of Concrete Cubes On A Cement-Sand Ballast, And The Bicycle Parts With An Asphalt Concrete Surface. The Basic Substructure For The Pedestrian And Bicycle Route Is Made Of A Non-Aggregate Mixture. Under The Foundation Layer, A Layer Of Improved Subgrade Stabilized With A Hydraulic Binder Should Be Made - After Obtaining The Secondary Deformation Modulus And Soil Compaction Index Consistent With The Design. In The Construction Section From Hm 2+61.62 To Hm 3+11.75, The Soil Should Be Replaced With Compacted Sand Ensuring The Permeability Of Rainwater. A Bicycle Path On The Section From Hm 3 + 11.75 To Hm 3 + 86.97 Made Using A Geocomposite With Rigid Nodes Under The Subbase Layers - In Accordance With The Documentation. The Order Also Includes The Construction Of Green Belts Sown With Grass In The Vicinity Of The Pedestrian And Bicycle Route, Drainage Strips With A Gravel Surface With A Concrete Slab With Holes, A Technical Access Road With A Concrete Pavement - Within The Inspection Infrastructure Sanitary Network And The Introduction Of Permanent Traffic Organization Signs. The Order Includes The Construction Of Retaining Walls Made Of Concrete, Reinforced With Steel. The Wall Foundations Are Placed On A Layer Of Lean Concrete. The Total Length Of The Retaining Walls In The Plan Is Approximately 27 M. When Constructing Retaining Walls Using The On-Site Concreting Method, System Formwork Elements Should Be Used To Ensure The Appropriate Smoothness Of The External Surfaces Of The Wall. The Order Includes Lighting The Pedestrian And Bicycle Route By Building 16 Aluminum Lighting Poles Mounted On Prefabricated Foundations And A Lighting Cabinet With A Cable Line. The Contractor Will Use System Formwork Elements For The Retaining Walls During The Construction Of The Walls. Retaining Structures By Concreting On Site. If It Is Not Possible To Make A Surface Of Bituminous Mass Arranged In One Layer With Proper Compaction, The Contractor Will Perform The Above-Mentioned Work. Surface In Two Layers Without Additional Claims For The Indicated Scope Of Work Towards The Ordering Party. The Cutting Of Trees Provided For In The Design Documentation Was Carried Out In A Separate Procedure And Completed Before February 28, 2025. The Contractor Of The Subject Of This Or