We Are Acquiring 1-2 Independently Anchored Floating Reception Stations For Boat Sewage In The Saaristo Sea For Delivery In Spring 2026. The Offer Is For A Single Device With Delivery Costs And For Two Devices With Delivery Costs. The Buyer Reserves The Right To Purchase 1 Or 2 Devices, Or Not To Complete The Purchase. The Requirements That The Offer And The Devices Must Meet Are Described Below: Device Dimensions, Volume And Cover: The Device Must Be Rectangular With The Longest Sides Being At Least 8 Meters. The Volume Of The Tank For Sludge Must Be At Least 9 M3 And At Most 9.9 M3. The Sludge Tank Must Be Made Of Hdpe Plastic (Wall Thickness At Least 24 Mm) Or Other Material Of Equivalent Strength. The Lid Height Of The Device Must Be 30-50 Cm Above The Water Surface On One Long Side And 80-100 Cm Above The Water Surface On The Other Long Side. The Material Of The Cover Must Be A Concrete Surface And/Or Pressure-Saturated Wood, The Minimum Thickness Of Which Must Be 28 Mm, So That The Cover Is Not Slippery, But Still Resistant To Wear And Tear. All Edges Of The Device Must Have Collision Protection That Protects Boats. There Must Be No Other Protruding Parts On The Edges Of The Device (For Example, The Safety Stairs Must Be Embedded In The Structure). The Corners Of The Device Must Be Rounded Or Beveled. Spare Parts And Tools Must Have Their Own Lockable Space On The Lid. Boats Must Have At Least 8 Mooring Bollards. Sludge Draining Must Be Arranged Using A Camlock Quick Coupler. The Connectors Of The Devices Must Be 2 Female Connectors. Ventilation Must Be Arranged With The Help Of A Fan. The Height Of The Fan Must Be 2.5 Meters From The Lid Of The Device. The Tank Must Have A Maintenance/Inspection Hatch For Possible Maintenance/Cleaning Work. There Must Be Safe Handles For Opening The Hatches That Do Not Cause A Tripping Hazard. The Device Must Have Reflectors So That It Can Be Seen From All Directions When It Is Illuminated In The Dark. The Device Must Have 70 X 130 Cm Attachment Point For Instructions And Logos At A Height Of Approx. 1.5 M. The Suction Cone Must Be Secured With A Camlock Lock And The Shut-Off Valve Must Have A Transparent Hose Spindle. The Drain Hoses Must Be 8 - 10 Meters Long And Uv-Protected. Up. Lifebuoy Throwing Cloth Ladder 3 Meters Lighting: The Device Must Be Illuminated At Dusk/Dark With Solar Energy-Based Lighting, The Battery Must Be In A Locked State. The Light Must Be Installed At A Height Of 2.5 Meters. Anchoring The Device: The Device Must Have At Least Four Anchor Points, From Which Chains Can Be Tightened And Adjusted From The Pontoon Deck If Necessary. Anchoring Must Be Feasible With Bottom Weights. The Chain Must Be 4X15 M Long-Stranded Din763 Chain 20 Mm Or Din763 Grade 40 Chain 16 Mm And Suitable Shackles 4 Pcs. The Weight Must Be At Least 1200 Kg. As A Whole, Which Shows The Materials Used With Their Strengths, As Well As The Dimensions Of The Device And Tank/S. References: The Tenderer Must Present At Least 3 References For The Design And/Or Construction Of Floating Structures From The Last 5 Years. Each Reference Must Show The Name, Location, Type, Implementation Time And The Role Of The Tenderer. 160, 21660 Nauvo No Later Than 4 May 2026 The Warranty Period Of The Product Put Into Use Must Be At Least Three Years.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
