1St Line Product From The Manufacturer, Split Hi Wall Inverter Type; Cold Cycle; Compulsorily Composed Of Condenser And Hi-Wall Type Evaporator, Automatic Restart Function, Refrigeration Capacity Of 12,000 Btus, Variation Of ± 5% Allowed, Wireless Remote Control Included, Vertical Condenser With Copper Coil, Rotary Compressor 220 V (Single-Phase) With Inverter Technology, 60Hz; With, Classification A In Inmetros Energy Efficiency Table, Mandatory Use Of Ecological Gas R-410, Single Phase; Guarantee Of At Least 12 Months From Receipt Of The Product, Product Subject To Verification Upon Delivery., 1St Product Made Of Steel, With Ruler Made Of Stainless Steel For Up To 2 Meters, Rubber Floor, Capacity For 300 Kg. Subject To Verification Upon Delivery., Capacity For 150 Kg, Divisions 100G, Minimum Weighing Of 2Kg, Height Of 1.35M, Carbon Steel Sheet Structure, Anthropometric Ruler With 2.00M Aluminum Ladder, 380X290mm Platform, Non-Slip Rubber Mat, Adjustable Feet, Chromed Steel Ruler, Stainless Steel Cursor, White Color, Gauged By Inmetro., Specifications: Maximum Capacity Of 200Kg, Divisions Of 50G; 6-Digit Lcd Display 15Mm High And 6.5Mm Wide With Blacklight; - 40-Hour Internal Battery; (Display Lighting After The Equipment Reaches Minimum Load); Platform 390 X 340Cm; Carbon Steel Sheet Structure; Hammered Paint Finish; Anti-Slip Mat; Adjustable Feet In Synthetic Rubber; Bivolt External Source 90 To 240 Vac With Automatic Switching; Tare Function Up To Maximum Capacity; Approved By Inmetro And Verified By Ipem; Weight: 12 Kg; 01 Year Warranty., Dental Chair Complete Structure Made Of Steel; Smooth Epoxy Or Electrostatic Painting; With Static And Dynamic Stability In All Positions Of Use At Maximum Capacity; Base With Protection In Rubber Or Similar Material, With Stability Without The Need For Fixing To The Floor; Upholstery Covering In Pvc Material Laminated In Stitching In Light Green Or Light Blue; Plastic Protection For The Patients Feet; Chair Arm With Shape And Fixing That Facilitate Patient Access; Armrest For The Patient On Both Sides Of The Chair, One Of Which Is Foldable. Articulating Headrest With Longitudinal Movement; Activation Through Electrical Controls With Reducers; Foot Control (Pedal) For Raising And Lowering Movements Of The Seat And Back, Pedal Control For Activating The Reflector, At Least Three Automatic Movements: One Returns To Zero And Two Can Be Programmed By The Dentist; Electrical Supply 110V Or 220V 60Hz According To The Local Network Of The Delivery Municipality; The Chair Must Be Capable Of Supporting And Lifting A Mass Of At Least 135Kg Plus The Additional Mass Of Dental Equipment And Accessories Mounted To The Chair As Specified By The Manufacturer; Supply Of Floor Plans And Others Necessary For Perfect Installation Of The Equipment, With All Information On Electrical, Hydraulic And Pneumatic Supplies For Installation; Provision Of Operating Manuals And Service Manuals With An Exploded View And Details Of The Parts, Main Defects And Corrections, With Diagrams Of The Electrical, Mechanical And Hydraulic Systems; Dental Equipment Coupled With Articulated Arm, With Horizontal Movement, With End Stops And Pneumatic Vertical Movement. Three Terminals, 1 For Ba Micromotor
