Bids Are Invited For Price Registration For Hiring A Company Specialized In Providing Road Signage Services, Including The Supply Of Materials, Equipment And Labor To Execute Vertical And Horizontal Signage On Public Roads Of Municipalities Consortiated To The Cimes Consortium.

National Manufacture Ornamental Arm Butterfly Type 3000Mm: For Application On Avenues And Streets With Heavy Traffic, And Can Be Used Uni And Bilaterally In Sae 1010/1020 Nbr8261 Carbon Steel, With A Diameter Of 60.3Mm And A Thickness Of 3Mm, With One Of Its Ends Having A Type C Curvature Of Extension 1890Mm, With 149 And A Radius Of 125 On The Axis And At The Other End A Small Inclination Of 50 For Better Positioning Of The Luminaire. At The Typical Bending Angle, There Is An Ornamental Fin In The Shape Of Butterfly Wings Made Of Steel N11 (3Mm) Msg With A Segment On The Straight Part Of The Arm, Protruding Until It Reaches Point O (Zero) At 300Mm From The End Of The Arm. Polvester-Based Electrostatic Powder Painting In White Color Nbr14622, Led Luminaire For Public Lighting From 60 W To 70 W,: Aluminum Or Stainless Steel Casing, With The Following Characteristics: Made Of Aluminum Alloy Injected At High Pressure Sae-305/306 Or Extrusion, Electrostatic Paint Finish In Gray Color Of Course, Identification Made Through Aluminum Plate Or Indelible Material, Minimum Degree Of Protection Of The Set Ip-66, Robust Construction Resistant To Severe Vibrations And Wind Action, Resistant To Mechanical Impact Ik-08. Arm Attachment System Commented For Tube 48, 3 A60, 3Mmm. Core Temperature Between 5000 To 5500K Maximum Power Of 60W To 70W, Minimum Effective Luminous Flux Of 9,600 Lumens, Minimum Luminary Efficiency Of 160Lm/W Color Reproduction Index 70 Or Greater 220V Power Supply (+/-10%) Or Higher Variation Range, Frequency 60Hz, Minimum Power Factor (0.92), Have Dps Of Minimum 10Ka. 7-Pin Socket And Dimmable Drive From 0-10 For Management Control And Centralized Tele-Management To Allow Activation, Dimming And Programming Of The Luminaire Individually The Luminaire Should Have A Useful Life Minimum Of 100,000 Hours, Maybe Three Years Of Guarantee Against Manufacturing Defect With Guarantee Issued By The Manufacturer Through A Declaration To The Distributor And The Attached Inmetro Certificate, With Active Certification Of This Company On The Date Of The Event. Only Luminaires Certified By Inmetro In Accordance With Ordinance 20 Of 2017 Will Be Accepted. Reports And Technical Documents Proving The Characteristics Described Herein Of The Luminaire Must Be Presented Along With The Price Proposal For The Analysis Of The Tender Committee., Hot-Dip Galvanized Iron Metal Post (6 Mt) For Flange: Post Made Of Carbon Steel Structural Tubes 1010/1020 With Longitudinal Welding (Nbr 6591 Enbr8261). The Tubes Must Be Guaranteed Through A Production Process Monitoring System And Quality Inspections Carried Out Throughout The Various Stages Of The Production Chain. Straight Type Teleconical Post In 2 Stages, Interconnected By Transverse Welding Process (Mig Welding) With Following Characteristics: 1 Stage - Base: 3 (76, 20 Mm)X 3000 Mm X 2, 25 Mm. 2 Stage-Top: 2.37(6.30 Mm) Flange De200mmx200mmx5/16, 04Anchor Bolts 1/2 X 500Mm. Opposite Must Undergo Protection Through Hot-Fire Galvanization, And Must Feature 100 Microns Of Zinc Thickness, 80W Led Luminaire For Public Lighting: Housing In Aluminum Or Stainless Steel, With The Following Characteristics: Made From High-Pressure Injected Aluminum Alloy Sae305/306 Or Extrusion, Finished With Electrostatic Painting In Light Gray Color, Identification Made Using Aluminum Plate