Request For Quotation Medical Products

Mechanical Mitral Heart Valve (The Leaflets And Valve Support Ring Are Made Of Graphite Material And Coated With Pyrolytic Carbon, Which Has Exceptional Strength, High Biocompatibility And Low Thrombogenicity. The Graphite Base Of The Leaflets Is Impregnated With Tungsten To Provide Radiopacity. Possibility Of Conducting Mri Examinations In Patients With An Implanted Mechanical Valve. The Opening Angle Of Each Leaf Is 850 (Optimal For Maintaining Laminar Blood Flow And Reducing Turbulence) With An Amplitude Of Movement Of 550 For Sizes 17-23Mm And 600 For Sizes 25-29Mm. The Valve Rotation Mechanism Facilitates Intraoperative Positioning. The Doors Open And Close Completely Within The Support Ring, Thereby Providing A Flat Profile. The Movement Of The Valves Is Directed By The Recesses On The Supports Of The Rotation Axis. The Ridges On The Leaflets Float Within These Depressions, Which Are Bathed In Systole And Diastole Blood, Minimizing Thrombus Formation. Convenient Swivel Mechanism. Suture Collar Contains Additional 3 Markers For More Precise Placement The Valves Have A Support Ring That Can Rotate Within The Sewn-In Cuff After The Valve Has Been Sutured After Positioning. Valve Size: 19,21,23,25,27,29,31Mm: Inner Diameter 14.8, 16.7, 18.6, 20.4, 22.5,24.2, 26.1Mm: Geometric Surface Area 1.63, 2.06, 2.55, 3.09, 3.67, 4.41, 5.18 Cm2, Effective Surface Area 1.16, 1.51, 2.03, 2.59, 3.08, Not Less Than 3.08, Not Less Than 3.08 Cm2, Standard Cuff Type.), Atrial Monopolar Electrode For Temporary Pacing. (Electrode For Temporary Cardiac Pacing M3 (2/0), 60 Cm. Two Needles Made Of Corrosion-Resistant High-Strength Alloy: 1) Straight Cutting, 90 Mm Long And 2) Stabbing Needle, 1/2 Circle, 26 Mm Long. The Piercing Needle Has A Design That Increases The Reliability Of Its Fixation In The Needle Holder Due To Longitudinal Notches On The Body. Steel Grade - 420. Individual Single Sterile Packaging That Protects The Contents From Moisture. Packaging (Individual And Group) Contains Complete Information About The Name Of The Product, Composition And Parameters For Monitoring The Contents After Removal From The Individual Packaging And Placement On A Sterile Table), Solution For Continuous Hemodiafiltration. Potassium 0-4 Mmol/L, 5 L. (Lactated Hemofiltration Solution 2 Mmol/L, 5 L Bags. Hemofiltration Solution Is Clear, Colorless Or Slightly Yellowish. The Ready-To-Use Solution Is An Electrolyte Solution Containing Glucose And A Lactate Buffer Used To Maintain And/Or Correct Fluid And Electrolyte Balance During Hemofiltration. During Hemodialysis, Water, Salts, Uremic Toxins, Electrolytes And Other Low Molecular Weight Compounds In A Gradient Diffusion Is Exchanged Between The Blood And The Dialysis Fluid. The Solution Can Also Be Used For Hemodialysis. A Solution Based On Lactate Buffer For Intravenous Administration Is Also Used As A Dialysis Solution For Continuous Procedures In Acute Renal Failure. The Injected Lactate Is Metabolized To Bicarbonate. Electrolytes Na+, K+, Mg2+, Ca2+, Ci- And The Precursor Of Bicarbonate - Lactate. Correction Of Fluid And Electrolyte Homeostasis (Circulating Blood Volume, Osmotic Balance) And Acid-Base State (Glucose) Helps To Avoid Disturbances In Energy Metabolism And Maintain The Physiological Values Of Blood Carbohydrates. Composition Of 1 Liter Of Solution: Sodium Chloride - 5.961 G, Potassium Chloride - 0.1491 G, Calcium Chloride Dihydrate - 0.2205 G, Magnesium Chloride. Hexahydrate - 0.1017 G, Sodium Lactate (50% Solution) - 8.52 G, Dextrose Monohydrate - 1.1 G. Ionic Composition And Theoretical Osmolarity Of The Finished Solution: Sodium 140 Mmol, Potassium - 2 Mmol, Calcium - 1.5 Mmol, Magnesium - 0.5 Mmol, Chloride - 108 Mmol, Glucose - 5.5 Mmol, Lactate-38 Mmol)