01 Mobilization And Demobilization 01.01 Mobilization And Demobilization Of Work - For Works That Require The Use Of A Large Amount Of Equipment And Are Carried Out In Urban Centers Or Close To Urban Centers. 01.01.01 Mobilization And Demobilization Of Work In Urban Center Or Bordering Region With A Value Of Up To 1,000,000, 00, 02 Work Facilities 02.01 Front Site Of Work 02.01.01 Supply And Placement Of Work Sign In Galvanized Sheet 26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metallic Structure, Special. 1, 25Mm, Including Autoclaved Eucalyptus Support Painted With Pva Paint Two (2) Coats, 03 Preliminary Services 03.01 Protection For Passersby Or Area Isolation With Yellow Zebra Tape, Including Bridge With Support Base In Thin Concrete, Height Of 150Cm, Supply And Handling, 03 Preliminary Services 03.02 Manual Demolition Of Reinforced Concrete, Including Removal And Stacking, Excluding Transport And Removal Of Demolished Material, 03 Preliminary Services 03.03 Manual Excavation H, 12/12/2025 - 17:06:05, 03 Preliminary Services03.04 Transport Of Material Of Any Nature With Wheelbarrow, With Distances Less Than Or Equal To 50M, Including Loading/Unloading, 04 Pit 04.01 Cutting, Bending And Assembly Of Steel Ca 50, Diameter 8Mm, Including Spacer, 04 Pit 04.02 Cutting, Diameter 10Mm, 04 Pit 04.03 Cutting, Bending And Assembly Of Steel Ca 60, Diameter 5Mm, 04 Pit 04.04 Formwork And Formwork For Wooden Column With Board And Batten, Reuse (3X), Exclusive Shoring, 04 Pit 25Mpa, Including Laying, Thickening And Finishing, 05 Electrical 05.01 Conduit 05.01.01 Threadable Rigid Pvc Conduit, Dn 25 Mm (1), Including Connections, Supports And Fixing, 05.02 Copper Wire 05.02.01 Insulated Flexible Copper Cable, 6 Mm², Flame Retardant 0.6/1.0 Kv, For Terminal Circuits - Supply And Installation. Af_03/2023, 05.03 Circuit Breaker 05.03.01 Din Type Bipolar Circuit Breaker, 16A Rated Current - Supply And Installation. Af_10/2020, 05.03 Circuit Breaker 05.03.02 Din Type Bipolar Circuit Breaker, 20A Rated Current - Supply And Installation. Af_10/2020, 05.03 Circuit Breaker 05.03.03 Din Type Three-Pole Circuit Breaker, 25A Rated Current - Supply And Installation. Af_10/2020, 05.03 Circuit Breaker 05.03.04 Voltage Surge Protection Device Dps 20Ka - 175V, 05.03 Circuit Breaker 05.03.05 Residual Differential Protection Circuit Breaker (Dr), Din Type Tetrapolar, Nominal Current 25A, Sensitivity 30Ma, Supply And Installation, Including Eyelet Terminal, 05.03 Circuit Breaker 05.03.06 Pvc Overlay Distribution Board, For 12 Din Circuit Breakers, Including Neutral/Earth Busbars, Exclusive Phase Busbar, 05.04 Socket 05.04.01 Set For 3/4 (20Mm) Conduit With One (1) Standard Socket, Three (3) Poles, Current 20A, Voltage 250V, (2P+T/20A 250V) And One (1) Station Board, Including Supply, Installation, Support, Module And Board, Exclusive Condulet, 05.04 Socket 05.04.02 Aluminum Condulet, Type C, Output Diameter 1 (25Mm), Exclusive Module E Plate, Including Fixing, 05.04 Socket 05.04.03 Aluminum Condulet, Type Lr, 05.04 Socket 05.04.04 Aluminum Condulet, Type Lb, 05.04 Socket 05.04.05 Aluminum Condulet, Type Ll, 06 Enclosure 06.01 Installation D
