Smooth Pointer Type Lever. Specification: Smooth Pointer Type Lever: Smooth Pointer Type Lever, Made Of Forged And Tempered Carbon Steel, With An Approximate Length Of 1 Meter, Chamfered Tip And Rounded Opposite End, Painted Or Varnished Finish For Protection Against Corrosion, Suitable For Heavy Lifting Services, Material Removal And Demolition In General., Universal 8 Insulated Pliers. Specification: Universal Pliers 8 Insulated: Universal Pliers With A Length Of 8 Inches (Approximately 200 Mm), Made Of Forged And Tempered Carbon Steel, With A Nickel-Plated Or Chrome-Plated Finish For Corrosion Resistance, Insulated Handles In Pvc Or Rubber Material With Electrical Insulation Capacity Of Up To 1000 Volts, Anatomically Shaped Nozzle For Cutting, Squeezing, Twisting And Stripping Wires, Suitable For Use In Electrical Installations, Industrial Maintenance And General Services., Fixed Saw Arc 12 Inches. Specification: Fixed Saw Arc 12 Inches: Fixed Saw Arc With A Total Length Of 12 Inches (Approximately 300 Mm), Structure In High-Resistance Carbon Steel With Electrostatic Painting Or Anti-Corrosion Finish, Ergonomic Handle In Wood Or Resistant Plastic, Support For Standard Blades With Manual Tightening System, Suitable For Precise Manual Cuts In Wood, Plastic, Pvc And Light Metals., 8Mm Zinc Plated Flat Washer. Specification: 8Mm Zinc Plated Flat Washer: Smooth Metal Washer (Flat), Used To Distribute The Load Of Screws And Nuts, Avoiding Damage To The Contact Surface And Ensuring Better Fixation. In Carbon Steel Sae 1010/1020, Wooden Bar. Specification: Wooden Bar Type: Eucalyptus, Sawn, Equipped And Duly Treated With Water-Soluble Protective Material In Autoclave Under Vacuum And High Pressure, In Accordance With The Provisions Of Law No. 4797 Of 10/20/1965 And In Decree No. 58.016 Of 03/18/1966, In Order To Be Able To Receive Color Painting White. They Must Have A Retention And Penetration Index Of 6.5 Kg Of Protective Material Per M Of Wood, In Accordance With Nbr 6232(1). The Pieces Must Have A Square Section Of 0.05 M A Minimum Durability Guarantee Of 10 Years Must Be Presented For The Wooden Supports Provided., 12/12/2025 - 09:35:32, 12/12/2025 - 09:35:33, Blue Ferrous Metal Sheet. Specification: Ferrous Metal Sheet, Material: Aluminum/Polyethylene, Type: Acm Sheet, Lamination Type: Aluminum Foil: 0. 21 Mm, Surface Treatment: Polyester Paint, Thickness: 3 Mm, Length: 5,000 Mm, Width: 1,500 Mm In Blue Color, Ferrous Metal Sheet White Color. Specification: Ferrous Metal Sheet, Width: 1,500 Mm In White, Ferrous Metal Sheet In Red. Specification: Ferrous Metal Sheet, Width: 1,500 Mm In Red Color, Ferrous Metal Sheet, Green Color. Specification: Ferrous Metal Sheet, Width: 1,500 Mm In Green, Trowel. Specification: Trowel: Blade Material: The Trowel Blade Must Be Made Of High-Resistance Tempered Carbon Steel, With A Polished Finish To Facilitate Handling And Cleaning, Ensuring Durability And Resistance To Wear During Use In Brick Laying, Plastering And Other Masonry Activities., Cutting Disc For Iron. Specification: Iron Cutting Disc: Iron Abrasive Cutting Disc With Diameter 4.1/2 (115 Mm) Or 7 (180 Mm), Thickness En
