Quotation are invited for HP/LP1 Bypass PCV and Startup Bypass PCV Spray Nozzle Removal, Inspection, Testing and Box up, L1 Station 1032506061 1 ITEM-00001 1.#SCOPE OF WORK - HP/LP1 BYPASS PCV AND STARTUP BYPASS PCV SPRAYNOZZLE REMOVAL, INSPECTION, AND BOX UP, L1 STATIONPERIOD OF WORK03 DAYS DURING TOTAL PLANT SHUTDOWN OF L1 STATION.TOTAL SHUTDOWN TENTATIVE SCHEDULE BETWEEN DECEMBER 2025 TO MAY 2026.QUANTITYSL NO#VAL VE#NOZZLE TYPE#QUANTITY#1#HP/LP1 PCV#OP#20#2#HP/LP1 PCV#SE#4#3#STARTUP BYPASS PCV#OP#6#4#STARTUP BYPASS PCV#SE#3#·#THE CONTRACTOR SH ALL VISIT THE SITE AND MAKE HIMSELF FULLY FAMILIARWITH THE WORK SCOPE, PLANT ACCESS, FACILITIES, COMPLEXITIES, SAFETYMEASURES ETC., BEFORE HE SUBMITS HIS BID.·#DEWA WILL NOT ACCEPT THE BID WITHOUT VISITING THE SITE, AS THIS WORKTO BE CARRIED OUT DURING TOTAL SHUT DOWN OF L1 STATION AND DELAY MAYAFFECT THE PLANT AVAILABILITY.·#TO GET A PTW CONTRACTOR MUST SUBMIT RISK ASSESSMENT 1 LS AND METHOD OFSTA TEMENT PRIOR TO START THE WORK.·#CHECK CONDITION SUITABLE TO CARRY OUT WORK. CONDUCT SITE SURVEY ANDSAFETY INSPECTION TO ASSESS THE WORKING ENVIRONMENT.·#A SAFETY MEETING WILL BE HELD TO EVALUATE THE RISK INVOLVED INMETHODS TO BE USED, RISK ASSESSMENT AND, TOOLBOX TALK TO BE GIVEN TO THEEMPLOYEES.·#MOBILIZE THE LABOR, EQUIPMENT, TOOLS, ETC. ON 24 HRS. NOTICE PERIOD.·#THE CONTRACTOR SHALL WORK ON 24 HRS. BASIS TO COMPLETE THE JOB ONTIME, BASED ON DEWA REQUIREMENT.·#AFTER RECEIVING THE CLEARANCE FROM DEWA, CHECK FOR ANY PRES SURE INTHE COMPLETE SYSTEM AND ENSURE THAT THE SYSTEM IS COMPLETELYDEPRESSURIZED.·#BEFORE START OF WORK ENSURE AREA IS CORRECTLY SEC URED AND SAFE TOWORK ON IN ALL RESPECTS, REPORT IF ANY ISSUE / OBSERVATION TO DEWAENGINEER.·#CHECK THE SCAFFOLDING ACCESS·#IDENTIFIC ATION OF THE SPRAY NOZZLES AND MARK EACH NOZZLE PRIOR TOREMOVE (WITH NOZZLE IDENTIFICATION NUMBER AND NOZZLE SPRAY DIRECTION)·#REMOV AL OF THE SPRAY NOZZLES FLANGES AND MARK THE NOZZLE AND CHECKTHE EXISTING MARK.·#REMOVAL OF THE SPRAY NOZZLES AND NOZZLE HOLDERS USI NG SPECIAL PULLERTOOLS.·#CLEAN AND INSPECT FOR ANY DEFECT. ANY DEFECT NOTICED SHALL INFORMDEWA ENGINEER.·#IN CASE OF DIFFICULTY IN R EMOVING THE NOZZLE, CONTRACTOR SHALL HAVEGAS CUTTER SET TO HEAT THE NOZZLE STUD.·#OEM/DEWA INSPECTION OF THE NOZZLES·#REPLACE DAMAGE D NOZZLES.·#REPLACE GASKETS, GLAND PACKING AND REINSTALL THE NOZZLES. SPECIAL NOTES / INSTRUCTIONS: HP/LP1 BYPASS PCV AND STARTUP BYPASS PCV SPRAY NOZZLE REMOVAL,INSPECTION, TESTING AND BOX UP, L1 STATION Please contact to Mr. Nadeem 04 8140587
[email protected] for any further inforamtion STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332503213)/$value
