Bids Are Invited For Hiring A Specialized Company To Supply And Install 1 (One) Gasoline Air Compressor, Piston Type, With A 200-Liter Tank And A Minimum Power Of 8 Hp, And A Complete 150-Liter Tank For Emulsion Application, Intended For The Ford F-4000 Emulsion Truck Belonging To The Autarchys Collection And; Supply And Installation Of 1 (One) Complete Compressed Air System For Tire Inflation.

Supply And Installation Of 1 (One) Gasoline Air Compressor, Piston Type, Reference Brand Chiaperini Cj 20 + Apv 200L - 9 Hp, Or Technical Equivalent, And A Complete 150-Liter Reservoir For The Application Of Asphalt Emulsion, Both Intended For Installation In A Ford F-4000 Model Truck, With Following Minimum Characteristics:; ; Air Compressor; - Gasoline Engine, Single Cylinder, 4 Stroke, Air Cooled, Minimum Power Of 8 Hp.; - Manual Start System, Preferably With 12V Electric Start; - 200 L Reservoir, Horizontal, High Pressure, Hydrostatically Tested, In Compliance With Norms Nr-13 And Inmetro/Asme.; - Minimum Working Pressure: At Least 140 Psi.; - Air Displacement: Minimum 500 L/Min (Approx. 20 Pcm).; - Oil Lubricated Compressor Unit, With 2 Pistons; - Belt Transmission, With Flywheel And Pulley Compatible With The Power Of The Equipment; - Additional Resources: Pilot Valve For Pressure Control, Safety Valve, Check Valve, Purge Valve (Drain), Air Filter, Valve Damper, Protection System For Moving Parts And Anti-Vibration System (Cushions Or Equivalent); ; Emulsion Reservoir; - Useful Capacity Of 150 L, Made Of Compatible Material For Storage And Application Of Asphalt Emulsion.; - Complete Supply With Valves, Connections, Hoses And Devices Necessary For Application.; - Body Fastening System, With Anti-Corrosion Protection And Suitable Painting; - Installation Integrated Into The Compressor System And The Trucks Application Network; ; Installation Service:; - Assembly Of The Set On The Ford F-4000 Emulsion Truck, Including:; Structural Fixing And Anchorage Project; Application Of Anti-Vibration Devices; Electrical Interconnection When Applicable; Final Adjustments, Functioning Tests And Commissioning Of Both Equipment.; ; Guarantee, Supply And Installation Of 1 (One) Complete Compressed Air System For Tire Inflation, Composed Of Piston Type Air Compressor, Magnetic Starter Key, Digital Calibrator For External Use, Pneumatic Piping And Hose Kit With Quick Couplings, All Duly Installed And Commissioned At The Location Indicated By The Administration, With The Following Minimum Characteristics:; ; Compressed Air Compressor (Reference: Cj40apv):; - Piston Type Air Compressor, 2 Stages, 3 Cylinders, Oil Lubricated, With Belt Transmission.; - Three-Phase 220V Electric Motor, Minimum Power Of 10 Hp.; - Minimum Reservoir Of 425 L, Built And Tested In Accordance With Nr-13 And Inmetro/Asme Standards, Supplied With Pressure Vessel Records.; - Maximum Working Pressure (Pmt): Equal To Or Greater Than 175 Psi (Approx. 12 Bar).; - Maximum Noise Level In Operation: ≪= 80 Db.; - Minimum Oil Reservoir: 2,000 Ml.; - The Equipment Must Be Supplied With All Necessary Accessories For Safe Operation, Including Protection, Control, Drainage And Safety Devices In Accordance With Good Manufacturer Practices; ; Magnetic Start Key• Complete Magnetic Start Key, Sized According To The Rated Current Of The 10 Hp / 220V Three-Phase Motor.• Electrical Contactor + Thermal Relay For Protection Against Overload, Adjusted In The Field.• Protection Box Suitable For The Installation Environment.• Installation, Parameterization And Testing Included.; ; Digital Tire Gauge For Outdoor Use:; - Digital Tire Gauge With Reading Display.; - Minimum Reading Range: 3 To 145 Psi.;