Bids Are Invited For Hiring A Specialized Company To Execute, With Materials And Labor, The Municipal Sports Events Center, According To Order Scc 00010112/2025, Project, Schedule And Descriptive Memorial And Budget Attached.

Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af 03/2022 Ps, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, Junior Civil Engineer (Hourly), Removal Of Wooden Scissors, With A Span Greater Than Or Equal To 8M, In A Mechanized Way, With Reuse. Af_09/2023, Removal Of Fiber Cement, Metallic And Ceramic Tiles, Using A Crane, With Reuse. Af_09/2023, 12/10/2025 - 11:13:47, Removal Of Wooden Weft For Roofing, Manually, Without Reuse. Af_09/2023, Demolition Of Masonry For Any Type Of Block, Clear Cutting And Trimming Of Trees With A Trunk Diameter Greater Than Or Equal To 0.20 M And Smaller Than 0.40 M. Mats. Af_03/2024, Transport With 6M³ Dump Truck, On Paved Urban Road, Dmt Up To 30 Km (Unit: Txkm). Af_07/2020, Mechanized Trench Excavation With Prof. Up To 1.5 M (Average Upstream And Downstream/One Composition Per Section), Backexcavation. (0.26 M3), Width. Less Than 0.8 M, On 1St Category Soil, In Places With A High Level Of Interference. Af_09/2024, Manufacture, Assembly And Disassembly Of Shoe Formwork, In Sawn Wood, E=25 Mm, 2 Uses. Af_01/2024, Concreting Footing, Fck 30 Mpa, Using Pump - Laying, Densifying And Finishing. Af_01/2024, Block Frame Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Block Frame Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, Prefabricated Reinforced Concrete Structure, Composed Of Pillars 4M High (Consider The Useful Height Of The 3M Pillar) With 14 Pillars Of Dimensions 20X40 Cm, Baldrame Beam (72M) And Strap Beam (72M) With A Height Of 30 Cm, According To The Annexed Project, Included Labor And Installation, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, Concreting Of Pillars, Fck = 25 Mpa, Densification And Finishing. Af_02/2022_Ps, Resin Plywood Sheet/Panel (Pink Resin Wood) For Concrete Form, 2200 X 1100 Mm, E = 6 Mm, 2 Coats. Af_09/2023 - Fund. And Bal., Fence Masonry Made Of Horizontally Drilled Ceramic Blocks Of 9X19x39 Cm (Thickness 9 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Plaster Or Single Putty In 1:2:8 Mortar, Mechanical Preparation Using A 400 L Concrete Mixer, Manually Applied To Blind Facade Cloths (Without The Presence Of Gaps), 25 Mm Thickness. Af_08/2022, Single Putty, In Mortar Trace 1:2:8 Mechanical Preparation, Manually Applied On Internal Walls Of Rooms With An Area Larger Than 10M², E = 10Mm, With Taliscas. Af_03/2024, Reinforcement Cast In Place In Concrete, Thickness Of *15* Cm. Af_03/2024, Lintel Cast In Situ In Concrete, Sheet Metal Applied To Masonry (With The Presence Of Gaps) And Concrete Facade Structures, With Spraying Equipment. 1:3 Mix Mortar Prepared In A 400 L Concrete Mixer. Af_10/2022, Ceramic Coating For Internal Walls With Enamelled Type Plates Of Dimensions 33X45 Cm Applied To The Entire Height Of The Walls. Af_02/2023_Pe, Aluminum Door